User Manual
Table Of Contents
- Welcome
- Overview
- Quick Start
- Connections
- Basic Phaser Operation
- Effect Types
- Controls
- Preset Storage and Recall
- Universal Bypass TM
- Stereo Routing
- Parametric EQ
- External Control
- Neuro App
- Specifications
- Troubleshooting
- Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the Lunar’s inputs?
- Can I power the Lunar directly over USB, without using the 9 Volt supply?
- When connecting the Lunar to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Lunar respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
- Can I use the Lunar in my amp’s effects loop?
- Rubber Feet
- Waste Disposal Notes
- Warranty
- Version History
SA241 Lunar Phaser User’s Guide 8
Power and Control Connections
DC 9V (Power)
Connect to the included 9 Volt DC power supply. The power supply must be regulated at 9 Volts
(direct current), able to source at least 180 mA (milliamps) of current, and the plug should have a tip-
negative, sleeve-positive polarity (the center tip is ground and the sleeve is power).
USB
Connect to your computer (Mac or Windows) to the Lunar’s USB port (denoted by the icon)
using a standard mini USB cable. The Lunar is a class compliant USB device, meaning that it should be
recognized by Mac and Windows computers automatically. For more information about the Lunar’s
USB capabilities, refer to the USB section of the User’s Guide.
Control Input
The 3.5 mm Control Input port connects to external control devices such as the Dual Expression
Pedal, Reflex Universal Expression Pedal, Neuro Hub, and Hot Hand Motion Controller. For more
information, refer to the Expression Pedal Input, Hot Hand Input, and Neuro Hub sections of the
User’s Guide.