User Manual

ManualsBrandsSource Audio ManualsChorus - FlangerLunar Phaser - STEREO PEDAL PHASER EFFECT FOR GUITAR

Table Of Contents

Welcome
Overview
Quick Start
- Power
- Guitar/Audio Connections
- Brief Knob, Footswitch, and Button Descriptions
Connections
- Input Side Connections
  - Input 1
  - Input 2
    - Input 2 as an Audio Input
    - Input 2 as a Neuro App Data Input
- Output Side Connections
  - Output 1
  - Output 2
    - Output 2 as an Audio Output
    - Output 2 as a Neuro App Data Daisy-Chain Output
- Example Neuro Daisy-Chain Connections
  - Mono Audio Path with Neuro Daisy-Chain
  - Mono-To-Stereo Audio Path with Neuro Daisy-Chain
- Power and Control Connections
Basic Phaser Operation
Effect Types
- Vibe
- Classic
- Multi
- Additional Effect Types
Controls
- Knobs
- Effect Switch
- LEDs
  - Engage / Bypass LED
  - External Control LED
- Footswitch
- Control Input Button
Preset Storage and Recall
- Saving Your First Preset
- Editing a Preset
- Exiting Preset Mode
- Quick Preset Switching
Universal Bypass TM
Stereo Routing
Parametric EQ
- Low Cut Filter
External Control
- Expression Control
Neuro App
- Main Menu
- Sound Editor
- Browse Sounds
  - Open In Sound Editor
  - Deleting or Publishing Presets
- Hardware Options
- Neuro Hub (Formerly the Soundblox Hub)
  - MIDI
- USB
  - USB-MIDI
- External Tap Tempo
Specifications
- Dimensions
- Weight
- Power
- Audio Performance
Troubleshooting
- General
  - Factory Reset using the Neuro App
  - Factory Reset using the Hardware (Firmware v1.06 and later)
- Noise
- Hot Hand Doesn’t Work
- Unit Appears Dead / No LEDs Lit
Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the Lunar’s inputs?
- Can I power the Lunar directly over USB, without using the 9 Volt supply?
- When connecting the Lunar to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Lunar respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
- Can I use the Lunar in my amp’s effects loop?
Rubber Feet
Waste Disposal Notes
Warranty
- Limited Transferrable Warranty
- Warranty Information
- Disclaimer and Limitation of Warranty
Version History

SA241 Lunar Phaser User’s Guide 13

Speed Knob

Controls the frequency of the LFO, which determines how fast the phaser effect is. The minimum

setting is 1 Hz (one LFO cycle per second) and the maximum setting is 10 Hz (ten LFO cycles per

second).

Resonance Knob

Sets the resonance of the notch filters in the phaser effect. Subjectively, a higher resonance will

result in a more metallic, bell-like or chime-like sound, whereas a lower resonance will sound more

subdued.

Shape Knob

Sets the shape of the LFO. For most effect types, Sine and Square shapes are available. In the

minimum position, the LFO is typically a sine wave shape. Fully clockwise is a square shape. By dialing

the Shape Knob somewhere between two different wave shapes, the LFO shape will be a hybrid

shape, blending elements of both of those wave shape types.

The Neuro App provide access to extended effect shapes, including envelopes.

PHASE SHIFT

TIME

PHASE SHIFT

TIME

Low Speed High Speed

Sine Square