User Manual

SA262 Ventris Dual Reverb Owner’s Manual
19
OPTION FOOTSWITCH (TAPPING): Pre-Delay Time – Functions like a traditional tap tempo
switch applied to the Pre-Delay Time, essentially creating a time synced echo effect.
OPTION FOOTSWITCH (PRESS & HOLD): Reverb Hold – See the description in the ROOM engine
section.
METAL BOX (13)
Direct from the mind of Bob Chidlaw (Source Audio’s Chief Scientist of Sound), the Metal Box
captures the reverberations of a very small space with extremely reflective walls – imagine your
guitar amp in a metal cargo-shipping container. It’s wild to imagine, ever wilder to hear. Turn up the
Modulation and turn down the reverb Time to create an interesting chorus effect.
CONTROL 1: Bass – Adjusts the level of the low-end frequencies on the wet signal. Turn the
knob counter clockwise for a lighter reverb or clockwise for thicker, more bass-heavy sound.
CONTROL 2: Mod Depth – Adds a pitch modulation to the wet signal. Turn the knob fully
counter-clockwise for zero modulation and clockwise to gradually increase the pitch depth.
Note: The rate of the modulation can be adjusted with the RATE control in the Neuro Editor, or
by tapping the OPTION footswitch when it is assigned to Modulation Rate.
OPTION FOOTSWITCH (TAPPING): Pre-Delay Time – Functions like a traditional tap tempo
switch applied to the Pre-Delay Time, essentially creating a time synced echo effect.
OPTION FOOTSWITCH (PRESS & HOLD): Reverb Hold – Sustains the reverb trail until the OPTION
footswitch is released.