User Manual

ManualsBrandsSource Audio ManualsDelays - EcoOne Series Nemesis Delay - PEDAL EFFECT DELAY WITH 24 EFFECTS, 128 PRESETS AND MIDI CONTROL

Table Of Contents

Welcome
Overview
Quick Start
- Power
- Guitar/Audio Connections
- Brief Knob, Footswitch, and Button Descriptions
Connections
- Input Side Connections
- Output Side Connections
- Power and Control Connections
Delay Engines
- Digital (0)
- Diffuse (1)
- Analog (2)
- Tape (3)
- Noise Tape (4)
- Degrade (5)
- Shifter (6)
- Helix (7)
- Reverse (8)
- Sweeper (9)
- Rhythmic (10)
- Slapback (11)
Extended Delay Engines
- Resonant Analog (12)
- Tremolo (13)
- Sequenced Filters (14)
- Dub (15)
- Chorus (16)
- Flanger (17)
- Double Helix (18)
- Complex Rhythmic (19)
- Lo-Fi Retro (20)
- Warped Record (21)
- Compound Shifter (22)
- Oil Can (23)
Controls
- Knobs
- Effect Engine Selector Encoder
  - Effect Engine Selector LEDs
- On/Off Footswitch
  - On/Off LED
  - Trails Mode
- Tap Tempo Footswitch
  - Tempo LED
  - Hold Mode
- Control Input Button
  - External Control LED
- Preset Select Button and LEDs
Preset Storage and Recall
- Recalling Presets
- Editing and Saving a Preset
- Copying a Preset to a New Location Using the Preset Button
- Copying a Preset to a New Location Using an External MIDI Controller
- Copying a Preset to a New Location Using the Neuro App
- Clearing all Presets
Universal Bypass
Stereo Operation
- I/O Routing Options
- Multi-Feedback Mode (“Stacked” Delays)
- Dual Delay Mode (in Mono)
- Stereo Phase Inversion
External Control
- External Switches
- Expression Control
Neuro App
- Main Menu
- Sound Editor
- Browse Sounds
  - Open In Sound Editor
- Hardware Options
- Example Neuro Daisy-Chain Connections
Neuro Hub
MIDI
- MIDI Channel
- Selecting Presets via Program Change Messages
- MIDI Clock
USB
- USB-MIDI
Specifications
- Dimensions
- Weight
- Power
- Audio Performance
Troubleshooting
- Restore Factory Settings
- Noise
- Hot Hand Doesn’t Work
- Unit Appears Dead / No LEDs Lit
Frequently Asked Questions
- What kind of instruments can I connect to the Nemesis’s inputs?
- Can I power the Nemesis directly over USB, without using the 9 Volt supply?
- When connecting the Nemesis to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Nemesis respond to MIDI messages being sent to it?
- Can I use the Nemesis in my amp’s effects loop?
MIDI Implementation
- Program Change Messages
- Clock Messages
- Continuous Control Messages
- Custom CC Mapping
Rubber Feet
Waste Disposal Notes
Warranty
- Limited Transferrable Warranty
- Warranty Information
- Disclaimer and Limitation of Warranty
Version History

SA260 Nemesis Delay User’s Guide 19

Controls

Knobs

Time Knob

Sets the delay time of tap 1, which is the main delay time. If an effect engine is selected that includes

multiple taps, additional taps will scale automatically. Turning the TIME KNOB while the delay engine is

active will skew the audio, creating a pitch shift. Note that different engines will have unique ranges

of delay times available on the TIME knob. For instance, the time range on ANALOG is limited from

40ms to 1.2 sec since that range is typical of analog delays. SLAPBACK has a maximum delay of

220ms. The maximum delay time for any engine is adjustable as a Neuro App parameter.

Controlling Tap 2 Delay Time with the Time Knob

The TIME knob can also be used to adjust the delay time of tap 2 by turning the TIME knob while

holding the CONTROL INPUT button. This allows tap 2 to be set to a limited number options without

needing to use the Neuro App. There are four delay times for tap 2 relative to tap 1 time:

Time Knob

Engine Selector

Feedback Knob

Mix Knob

Intensity Knob

On/Off LED

Tap Footswitch

Control LED

Control Input Button

Tap LED

On/Off Footswitch

Rate Knob

Subdivision Switch

Mod Knob

Preset Select/Save Button Preset LEDs

Pedal Input Switch

1/2

8ths

2/3

Swing 8ths

3/4

Dotted 8ths

Quarters