User Manual
Table Of Contents
- Welcome
 - Contents
 - Feature Overview
 - Connecting the Pedal
 - Connections
 - Basic Operation
 - The Options Menu
 - Navigating the Options Menu
 - Controls
 - Common EQ Configurations
 - Stereo Operation & Signal Routing
 - Preset Storage and Recall
 - Additional Features
 - External Control
 - Expression Control
 - Neuro Desktop and Mobile Editors
 - The Neuro Desktop Editor
 - The Neuro Mobile App — with New Direct MIDI-USB Support
 - Neuro Hub
 - MIDI
 - USB
 - Specifications
 - Troubleshooting
 - Frequently Asked Questions
- What kind of instruments can I connect to the EQ2’s inputs?
 - Can I power the EQ2 directly over USB, without using the 9 Volt supply?
 - When connecting the EQ2 to a recording interface or mixer, should I use a Lo-Z (microphone) or Hi-Z (line / instrument) input?
 - Why doesn’t the EQ2 respond to MIDI messages being sent to it?
 - Can I use the EQ2 in my amp’s effects loop?
 - How do I update the firmware?
 
 - Rubber Feet
 - Waste Disposal Notes
 - Warranty
 - Version History
 
SA270  EQ2 User Guide   
37 
Rubber Feet 
The EQ2 comes standard with a flat aluminum bottom, making it easy to apply Velcro and mount to a 
pedalboard. Additionally, adhesive rubber feet are included in the EQ2 box. Applying the rubber feet 
to the EQ2 can help prevent it from sliding on flat surfaces such as a hardwood floor. 
Waste Disposal Notes 
If possible, dispose of the device at an electronics recycling center. Do not dispose of the device with 
the household waste. 
For full compliance with EN 61000-4-6 standard, input cable must be less than 3 meters in length. 
Warranty 
Limited Transferrable Warranty 
Source Audio, LLC (hereinafter “Source Audio”) warrants that your new Source Audio One Series EQ2 
Programmable EQ, when purchased at an authorized Source Audio dealer in the United States of 
America (“USA”), shall be free from defects in materials and workmanship under normal use for a 
period of two (2) years from the date of purchase by the original purchaser. Please contact your 
dealer for information on warranty and service outside of the USA. 
Under this Limited Warranty, Source Audio’s sole obligation and the purchaser’s sole remedy shall be 
repair, replacement, or upgrade, at Source Audio’s sole discretion, of any product that, if properly 
used and maintained, proves to be defective upon inspection by Source Audio. Source Audio reserves 
the right to update any unit returned for repair and to change or improve the design of the product 
at any time without notice. Source Audio reserves the right to use reconditioned parts and 
assemblies as warranty replacements for authorized repairs. Any product repaired, replaced, or 
upgraded pursuant to this Limited Warranty will be warranted for the remainder of the original 
warranty period. 
This Limited Warranty is extended to the original retail purchaser. This Limited Warranty can be 
transferred to anyone who may subsequently purchase this product provided that such transfer is 
made within the applicable warranty period and Source Audio is provided with all of the following 
information: (i) all warranty registration information (as set forth on the registration card) for the 
new owner, (ii) proof of the transfer, within thirty (30) days of the transfer, and (iii) a photocopy of 
the original sales receipt. Warranty coverage shall be determined by Source Audio in its sole 
discretion. This is your sole warranty. Source Audio does not authorize any third party, including any 
dealer or sales representatives, to assume any liability on behalf of Source Audio or to make any 
warranty on behalf of Source Audio. 
Warranty Information 
Source Audio may, at its option, require proof of the original purchase date in the form of a dated 
copy of the original authorized dealer’s invoice or sales receipt. Service and repairs of Source Audio 
products are to be performed only at the Source Audio factory or a Source Audio authorized service 










