Operation Manual

TROUBLE SHOOTING

PROTECTION CIRCUIT

Short Circuit Protection engaged: The amplifier will turn off and try to come back on

immediately. The amplifier will cycle like this indefinitely, with "blips" of sound each time. If

this is the case, check your speakers and wiring for low impedance and short circuits.

Thermal Protection engaged: The amplifier will turn off and several minutes later will

come back on. In this case, ensure that there is nothing blocking the normal convective

airflow of the amplifier. No obstruction should be within 2" of the amplifier on all sides.

NOTE: Low battery voltage will cause the amplifier to run warmer and possibly

damage the amplifier.