svx2 2-Way Staggered Frequency Electronic Crossover OWNER’S MANUAL SOUNDSTREAM T E C H N O L O G I E S
svx2 Z&Way Staggered Frequency Electronic Crossover OWNER’S MANUAL Thank you for purchasing the Soundstream S/X2. You now own one of the finest automotive electronic crossovers made, a precision component with audiophile performance. For maximum performance, we suggest you take a few moments to read through this manual, to better acquaint yourself with the design features and capabilities of your new SVX~. CONNECTIONS AND CONTROLS Figure I. Rear panel of SVX2 contains Input/Oulpuf and Power connections.
Fader On/Off Switch Subwoofer fader level is available when FADER is ON, and the rear outputs of your head unit are connected to the SvX2’s Rear Inputs. APPLICATIONS Source Head Unit 0-m Figure 3. Rear output >I Front Output svx2 Electronic Crossover An example sysfem using on SVX2 configured for front ond rear operation. INSTALLATION Automotive sound system installations can be tricky, especially for first-timers.
II-I either case, connect the components exactly as intended in the final installation. Make all power connections last, test the system, and then disconnect all power until final installation is complete. SERwCE Your SVX2 is protected by a limited warranty. Please read the enclosed warranty information carefully. Should any problem occur, contact your local Soundstream dealer. Connecting Audio Signal Cables and Power Wires 1. Make sure power to your audio system is off. 2.
