User Manual
Table Of Contents
- 1. UNPACKING
- 2. ACCESSORIES
- 3. OVERVIEW
- 4. MAIN FEATURES
- 5. REAR PANEL CONTROLS
- 6. INSTALLATION
- 7. LED DISPLAY AND BUTTONS OPERATION
- 8. IR REMOTE CONTROL
- 9. DIMMER CURVES
- 10. DMX512 CHANNEL CHART (12CH)
- 11. SPECIFICATIONS
- 12. WARRANTY AND SERVICE
- 13. WARNING
- 14. DISIMBALLAGGIO
- 15. ACCESSORI
- 16. PANORAMICA
- 17. CARATTERISTICHE
- 18. CONTROLLI DEL PANNELLO POSTERIORE
- 19. INSTALLAZIONE
- 20. FUNZIONI DEL DISPLAY E DEI CONTROLLI
- 21. IR CONTROLLO REMOTO
- 22. CURVE DIMMER
- 23. TABELLA DEI CANALI DMX512 (12CH)
- 24. SPECIFICHE
- 25. GARANZIA ED ASSISTENZA
- 26. AVVISO
Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
Installation
Always secure xture using a safety chain and carrying handles. Never carry the xture
by its cord.
Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. Do not defeat
the safety purpose of the polarized or grounding-type plug. A polarized plug has two
poles; a grounding-type plug has two poles and a third grounding terminal. The third
prong is provided for your safety. If the provided plug does not t into your outlet,
refer to an electrician for replacement.
Power Supply
In case of external power supply, the apparatus should be connected to the power sup-
ply only of the type as marked on the apparatus or described in the manual. Failure to
do could result in damage to the product and possibly the user. Unplug this apparatus
during lightning storms or when unused for long periods of time.
Fuse
To prevent the risk of re and damaging the unit, please use only of the recommend-
ed fuse type as described in the manual. Before replacing the fuse, make sure the unit
turned o and disconnected from the AC outlet.
Electrical Connection
Always disconnect from power source before servicing or replacing fuse and be sure
to replace with same fuse size and type. Cut o power before moving, repairing and
cleaning the machine. Improper electrical wiring may invalidate the product warranty.
To avoid electric shock, all xtures must be connected to circuits with a suitable ground.
Do not power on and power o the xture in a short time.
DMX connection
When use DMX controller, please make sure that there is no interference sources (e.g.
intercom, high frequency radio waves and radiation source).
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
5
ENGLISH
WF-U11 User manual