3X10W 4IN1 CREE LED 3-HEAD MOVING LIGHT USER MANUAL Please read this manual carefully and proper take care of this manual.
ENGLISH Dear customer, First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
ENGLISH AXIS III User manual IMPORTANT SAFETY SYMBOLS The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
ENGLISH AXIS III User manual ff Follow all instructions Water / Moisture The apparatus should be protected from moisture and rain and can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc. Condensation To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages.
ENGLISH AXIS III User manual DMX connection When use DMX controller, please make sure that there is no interference sources (e.g. intercom, high frequency radio waves and radiation source). Cleaning Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol. Servicing Do not implement any servicing other than those means described in the manual. Refer all servicing to qualified service personnel only. Only use accessories/attachments or parts recommended by the manufacturer. 1.
ENGLISH AXIS III User manual range of other fixtures. All products in our catalogue has been long tested with this device, so we recommend you to use Genuine SOUNDSATION Accessories and Parts. Ask your SOUNDSATION dealer or check out our website www.soundsationmusic.com for any accessories you could need to ensure best performance of the product. 2. OVERVIEW AXIS III 3-head moving light is part of a wider range of SOUNDSATION DMX intelligent LED Moving Head Lights.
ENGLISH AXIS III User manual expert. 5. DMX CONNECTION DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which the fixtures are connected is not important and has no effect on how a controller communicates to each fixture. Use an order that provides for the easiest and most direct cabling.
ENGLISH AXIS III User manual dardized around the world. However, two are the most common standards: 5-Pin XLR and 3-Pin XLR system. If you wish to connect AXIS III to a 5-Pin XLR input fixture, you need to use an adapter-cable or make it by yourself.
ENGLISH AXIS III User manual flashes, then press UP/DOWN buttons to choose the desired value. Press ENTER button again to confirm, or wait for 10 seconds, or press the MENU long time to go back to main mode.
ENGLISH AXIS III User manual return to main menu. Channel Mode Choose ChNd and press ENTER button to confirm. Press UP/DOWN to choose the desired channel mode, like 6Ch (6 channels), or 9Ch (9 channels), or 1 1Ch (11 channels), or 21Ch (21 channels) mode. Press ENTER button to save. Wait for 10 seconds or press MENU long time to return to main menu. Slave mode Choose SLNd and press ENTER button to enter Nast (Master) or SL 1 (slave 1) or SL 2 (slave 2) mode. Press ENTER button to save.
ENGLISH AXIS III User manual Tilt direction Choose tilt and press ENTER button to confirm. Press UP/DOWN to chose no (Tilt normal direction) or Yes (Tilt reverse position). After chosen, press ENTER button to save. Wait for 10 seconds or press MENU long time to return to main menu. Test Press MENU button and scroll till test appears. Then press ENTER button; led display will flash. The fixture will run a built in program to test all functions. Press MENU to back to main menu.
ENGLISH AXIS III User manual address code to control the light. The address code value ranges from 1 to 512. All fixtures in the same network must be set to same DMX address.Press MENU button and select Addr menu. Press ENTER button, address will flash. Use UP /DOWN to select DMX512 address. After chosen, press ENTER button to confirm (address stops flashing).
ENGLISH AXIS III User manual 7 3 5 4 6 5 7 000-255 8 First head driver speed, fast to slow 000-007 Blackout 008-024 025-041 G 042-057 R B 058-074 W 075-090 R+G 091-107 R+B 108-123 R+W 124-140 G+B 141-156 G+W 157-173 B+W 174-189 R+G+B 190-206 R+G+W 207-222 R+B+W 223-239 G+B+W 240-255 R+G+B+W 9 000-255 Second head, Pan position 10 000-255 Second head, Pan fine 11 000-255 Second head, Tilt position 12 000-255 Second head, Tilt fine 13 000-255 Second head d
ENGLISH AXIS III User manual 11. WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.
ENGLISH AXIS III User manual This product is imported in EU by Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsationmusic.
www.soundsationmusic.com Ver 1.0 - Nov.
