26 Channel Wireless DMX Unit USER MANUAL Please read this manual carefully and proper take care of this manual.
Dear customer, First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
TABLE OF CONTENTS 1. 1. INTRODUCTION.....................................................................................................6 1.1. Unpacking..................................................................................................................................................................6 1.2. Accessories................................................................................................................................................................7 2.
ENGLISH Aircom 126 User manual IMPORTANT SAFETY SYMBOLS The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
ENGLISH Aircom 126 User manual install according to the manufacturer’s instructions. Object and Liquid Entry Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety. Power Cord and Plug Protect power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Do not defeat the safety purpose of the polarized or grounding-type plug.
ENGLISH Aircom 126 User manual 1. 1. INTRODUCTION Thank you for purchasing our AIRCOM 126.
ENGLISH Aircom 126 User manual ff This User manual ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in a safe place the original packaging material for future use. 1.2. Accessories SOUNDSATION can supply a wide range of quality accessories that you can use with your DMX unit, like Cables, Controllers, Splitters, Stands, and a wide range fixtures. All products in our catalogue has been long tested with this device so we recommend to use Genuine SOUNDSATION Accessories and Parts.
ENGLISH Aircom 126 User manual 2.1. ID code and LED Color Correspondence DMX data communication occurs only if transmitter an receiver are both under same ID code. Each ID has a different assigned color as shown in next table. ID 1 2 3 4 5 6 7 COLOR Red Green Red + Greed = Yellow Blue Red + Blue = Purple Green + Blue = Cyan Red + Greed + Blue = White NOTE (*): It is highly recommended to connect this terminal to main electrical earth for security reasons. Always pay attention to safety! 3.
ENGLISH Aircom 126 User manual ff Green LED flash: Receiving DMX Data ff Red LED flash: Transmitting DMX Data ff RF frequency: 2.400-2.4835 GHz with automatic searching ff ID Code “1-7” groups: Each group can contain up to 512 DMX channels. ff Communication between transmitter and receiver is on only under same ID code set on both units. 4.3. Establishing Communication One Transmitter + one Receiver In order to operate, we assume the use of two AIRCOM 126 units.
ENGLISH Aircom 126 User manual NOTE: If two transmitters are activated simultaneously on same ID value, although there is no risk of damage to the equipment, it is good to know that only the first activated transmitter will effectively control the devices in the network, and the second will be completely ignored. So we do not recommend to use two or more transmitters on same ID value, as this is absolutely useless. 5. DMX CONNECTION There are 512 channels in a DMX-512 connection.
ENGLISH Aircom 126 User manual Connect fixtures using shielded 2-conductor twisted pair cable with 3-pin XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-), and pin 3 is Data positive (S+). DMX use of 3-Pin XLR Connectors INPUT 3-Pin XLR Pin 1: GND Pin 2: DMX Pin 3: DMX + OUTPUT CAUTION: Wires must not come into contact with each other; otherwise the fixtures will not work at all, or will not work properly. 5.2.
ENGLISH Aircom 126 User manual 6. SPECIFICATIONS Frequency Band Modulation Type Frequency range Channel Frequencies Communication Distance Receiver Sensibility Transmission Power Antenna Protocols Number of DMX Channels Power Input Data Input/Outputs Data Pin Configuration Unit Size (WxHxD): Unit Net Weight Packing Size (WxHxD): Packing Gross Weight: 12 2.
ENGLISH Aircom 126 User manual 7. WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.
ENGLISH Aircom 126 User manual 9.
This product is imported in EU by Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsationmusic.
www.soundsationmusic.com Ver 1.
