Owner's manual

IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to [e-mail].
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE™ LED Lightbar
nForce Lightbar 05.14
Wire Pin # Wire Color Wire Function
1 Blue/White Rear Corners
2 Green/White Rear Inboard 1
3 Gray Mode Select
4 Black Cruise Mode
5 Light Green Scene Lighting
6 Brown/White Takedown Flash
7 Purple Low Power
8 White Pattern Select / Tail
9 Black/White Left Turn
10 Gray/White Arrow - Right
11 Purple/White Arrow – Left
12 Pink/White Ignition Input
13 Blue Front Corners
14 Green Front Inboard 1
15 Yellow Front Inboard 2
16 Orange Front Inboard 3
17 Red Alley Passenger
18 Pink Alley Driver
19 Red/White Alley Flash
20 Brown Takedown
21 Yellow/White Rear Inboard 2
22 Orange/White Rear Inboard 3
23 Red/Black Right Turn
24 Light Green/White Sync
24 23 22 21 20 19 18 17 16 15 14 13
12 11 10 9 8 7 6 5 4 3 2 1
Connector Pinning Chart
PIN#24 - Light Green/ White PIN#23 - Red Black PIN#22 - Orange/ White PIN#21 - Yellow/ White PIN#20 - Brown PIN#19 - Red/ White PIN#18 - Pink PIN#17 - Red PIN#16 - Orange PIN#15 - Yellow PIN#14 - Green PIN#13 - Blue
Pink/ White - PIN#12
Purple/ White - PIN#11
Gray/ White - PIN#10
Black/ White - PIN#9
White - PIN#8
Purple - PIN#7
Brown/ White - PIN#6
Light Green - PIN#5
Black - PIN#4
Gray - PIN#3
Green White - PIN#2
Blue/ White - PIN#1
Functional Inputs
Functional Inputs connect to your control
head or switching unit. Applying +12Vdc
to any functional Input will activate it's
function (default-active high).
30 Amp FUSE
RED 14 GA.
BLACK 14 GA.
Red LED
BREAKOUT BOX HOOKUP:
a. Refer to Table 1 for Breakout Box input wire default
functions
b. Make sure the 24-pin connector and the RJ-45
connector are snapped in securely.
c. Follow the label for the wire color to connect to a 12Vdc
source, which turns on that given light or lights.
d. Make sure your wire connections are secured and
isolated from any other wire.
Table 1.
.
GROUND
(Customer Supplied)
GROUND
POWER
CABLE
RJ-45 CABLE
Switch #1
Switch #2
Red LED
Green LED
+12v
Ignition
Switch
10.
Lightbar
Siren
USB CONNECTOR MINI TYPE B