Manual

IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to [e-mail].
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
FLASH PATTERNS AND CONNECTOR INSTRUCTIONS
BREAKOUT BOX HOOKUP:
Make sure the 24-pin connector and the RJ-45
connector are snapped in securely.
Follow the label for the wire color to connect to a 12Vdc source,
which turns on that given light or lights.
Make sure your wire connections are secured and isolated from any
other wire.
LED Module Flash Patterns
# Pattern Name Sequence fpm* fps**
1 Quint Alternating 70 1.18
2 Warp Alternating 350 5.88
3 Inter-Cycle Flash Alternating - -
4 Quad Flash Alternating 80 1.35
5 RoadRunner™ Alternating 115 1.92
6 RoadRunner™ Simultaneous 115 1.92
7 Slow Runner Alternating 70 1.16
8 Slow Runner Simultaneous 70 1.16
9 Q-Switch™ Variable - -
10 Single, Steady Burn Steady Burn 115 1.92
11 Quad, Steady Burn Steady Burn 80 1.35
12 Warp, Steady Burn Steady Burn 350 5.88
13 Nothing, Steady Burn Steady Burn - -
14 E-Pattern Single Flash Alternating 230 3.85
15 E-Pattern Double Flash Alternating 128 2.13
16 E-Pattern Single Flash Simultaneous 230 3.85
17 E-Pattern Double Flash Simultaneous 155 2.6
18 Warp 1,2,3,4 Variable - -
19 Warp 2,3,1 Variable - -
20 Warp 3,2,1 Variable - -
21 Steady Burn Steady Burn - -
Input Group Control Light Output Groups
Front Inboard 1 Red, Yellow
Front Inboard 2 Green
Front Inboard3 Blue
Rear Inboard 1 Red, Yellow
Rear Inboard 2 Green
Rear Inboard3 Blue
Take Down White, Orange
*fpm=Flashes per Minute
**fps=Flashes per Second
LED Take down & Alley Flash Pattern
1 RoadRunner™ Alternating 115 1.92
2 PowerPulse™ Alternating 180 3.00
3 Q-Switch™ Variable - -
4 ETM™ Simultaneous 214 3.57
5 Steady Burn Steady Burn - -
Directional Bar Warning Function Patterns
1 PowerPulse™ Alternating Center Out 180 3.00
2 PowerPulse™ Alternating Left/ Right 180 3.00
3 Quad Alternating Center Out 80 1.35
4 Warp Alternating Adjacent 3.50 5.88
5 2X Individual Sweep - -
6 Hyper Scan Pulsing + Sweep - -
7 Super Scan Dual Rate Pulse/ Alt - -
8 Power Flash Dual Rate Alt/ Pulse - -
9 Thunder and Lighting Random - -
Split Arrow Bars Also Have The Following Multi-color Patterns
10 RoadRunner™ Alternating 115 1.92
11 Warp Adjacent 350 5.88
12 Warp Adjacent 350 5.88
13 Inter-Cycle Flash Adjacent - -
14 Inter-Cycle Flash Alternating - -
15 Inter-Cycle Flash Alternating - -
16 Inter-Cycle Flash Alternating - -
17 Inter-Cycle Flash Alternating - -
Directional Bar Directional Function Patterns For
Left, Center Out, & Right Sequences
1 Solid Arrow Plus, Slow Grow / Decay
2 Solid Arrow, Slow Solid
3 Individual Arrow, Fast Individual
4 Chaser Arrow, Fast 2X Individual
SWITCH SETTINGS
SW1 SW2 SW3 SW4 SW5 SW6 PURPOSE
OFF OFF OFF 8 WIRE ARROW CONTROL
OFF OFF ON NO ARROW
OFF ON OFF N/A
OFF ON ON 4 MOD ARROW
ON OFF OFF 5 MOD ARROW
ON OFF ON 6 MOD ARROW
ON ON OFF 7 MOD ARROW
ON ON ON 8 MOD ARROW
ON PASSENGER-SIDE EXIT
OFF DRIVER-SIDE EXIT
ON SPLIT-COLOR ARROW MODULES
OFF FULL ARROW MODULE
ON FOR TURN SIGNALS ON YELLOW OUTPUT
OFF FOR TURN SIGNALS ON BLUE OUTPUT
LIGHTBAR CONTROLLER CONNECTOR INSTRUCTIONS
* Rear inboards have RED and BLUE wires
* Front inboards have GREEN wires
#EMG2000 MAGNUM™ LED Lightbar