SM-CMD3012 Multimedia DVD/CD/MP3 receiver with built-in 3” TFT display and TV-tuner Instruction manual DVD/CD/MP33” TFT-
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ............................................................................................... 2 Important safeguards ......................................................................................... 3 Accessories........................
Important safeguards Read carefully through the manual to familiarize yourselves with this unit. Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit. “CLASS 1 LASER PRODUCT” This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the system. Always keep the volume low enough so that you can hear sounds from outside the vehicle. Should this product fail to operate properly, contact your dealer or nearest service center. Accessories 1. 2. 3. 4. 5. 6. 7. 8.
Installation/connection Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring and make sure that the unit works properly. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. 2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place. 3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands. 4.
2. DIN REAR-MOUNT (Method B) For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets. 1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side. 2. Screw. 3. Factory radio mounting brackets. 4. Vehicle dashboard. 5. Lock (remove this part). Note: The outer trim frame and mounting sleeve are not used for method of installation.
Electrical Connection Connector A 1. 2. 3. 4. Memory +12V 5. Auto antenna output 6. 7. +12V (to ignition key) 8. Ground Connector B 1. Rear right speaker (+) 2. Rear right speaker (-) 3. Front right speaker (+) 4. Front right speaker (-) 5. Front left speaker (+) 6. Front left speaker (-) 7. Rear left speaker (+) 8.
ISO Connection table Location Function Connector A 1 2 3 4 5 6 7 8 Connector B Rear right (+) - Purple Rear right (-) - Purple/Black Front right (+) - Grey Front right (-) - Grey/Black Front left (+) - White Front left (-) - White/Black Rear left (+) - Green Rear left (-) - Green/Black Battery +12V/Yellow Auto Antenna - Blue Ignition/Red Ground/Black Note: Power antenna wire is intended for power supply of the antenna and for remote control of an additional amplifier.
Unit controls Front panel 1. IR sensor 2. 1/PLAY/PAUSE button 3. POWER/MUTE button 4. MODE button 5. VOLUME+ button 6. MENU button 7. BND button 8. 6/DIR+ button 9. NEXT button 10. TFT display 11. OPEN button 12. USB port 13. PREVIOUS button 14. 2/INT button 15. 3/RPT button 16. OK button 17. VOLUME- button 18. AS/PS button 19. 4/RDM button 20. 5/DIR- button 21.
Inner panel 1. Memory card slot 2. Eject button 3. Panel status indicator 4. RESET button (hole) 5. Disc loading slot Pressing RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you flip down the panel and flashes when you remove the panel.
Remote controller (RC) 1. MODE button 2. PWR button 3. BND/RDM button 4. ENTER button/Cursor buttons 5. STEREO/MONO button 6. PTY/PROG button 7. P.SCN/RPT button 8. SEEK-/PREVIOUS button 9. AF/TA button 10. STOP/PBC button 11. OSD button 12. Number buttons 13. PLAY/PAUSE button 14. MUTE button 15. MENU button 16. SUB-T button 17. SETUP button 18. ANGLE button 19. INT button 20. A-B/ZOOM button 21. VOL+ button 22. SEEK+/NEXT button 23. SEL button 24. AUDIO/GOTO button 25.
Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote controller (pic.2). Pic. 1 Pic. 2 Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button (hole) with a pointed object (such as a ballpoint pen) to set the unit to initial state. Note: When some errors occur, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions. Turning the unit on/off Press any button on the panel or the RC (except OPEN button) to turn on the unit.
button on the panel to select the audio setting item. Press ENTER button or RIGHT cursor button on the RC or OK button on the panel to enter the selected item. Press LEFT/RIGHT buttons on the RC or VOLUME+/VOLUME- buttons on the panel to adjust the audio setting. Press and hold OK button on the panel or press SEL button on the RC again to save the setting and return to current mode. Note: If turn off the power, all the settings of each mode will be saved.
Screen: Adjust screen aspect: 16:9 => 4:3 => FULL. Color reset: Resume color default status. (Select YES or NO with cursor buttons, press ENTER button on the RC or OK button on the panel to confirm). RDS SETUP: TA: Seek/Alarm. In TA SEEK mode, When newly tuned station does not receive TP information for 5 sec, the radio retunes to next station which has not the same station (PI) as the last station, but has the TP information.
Area: Select area: RUSSIA => EUROPE => U.S.A => SOUTH AMERICA. CLOCK MENU Clock: Set CLOCK display time or not. OFF/ON. Clock Hour: set clock 12H/24H. Clock adjust: Set CLOCK ADJUST time.
Radio operations Band selection Press BND/RDM button on the RC or BND button on the panel to switch to the bands in the following order: FM1 - FM2 - FM3 (OIRT) – MW1 (AM1) – MW2 (AM2). Manual/automatic tuning Manual tuning: Press and hold PREVIOUS/NEXT buttons on the RC or panel to enter manual tuning mode. MANUAL will be displayed. Press these buttons repeatedly to change the frequency upward or downward step by step.
Stereo/Mono reception In FM mode, press STEREO/MONO button on the RC to select stereo or mono signal reception mode. On-screen display Press OSD button on the RC to show enabled PTY function icon. RDS background RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available. AF (Alternative frequencies) function Press and hold AF/TA button on the RC or BND button on the panel to enable AF function.
PTY (Program type) function Press PTY/PROG button on the RC to open PTY program type list, and repeat pressing PTY/PROG button to select a PTY type. After selecting the program type you want, press number buttons 1 - 6 on the RC or on the panel to start search. Press it again to stop the PTY search. If PTY code is different or not available, "PTY NONE" blinks on the display. Other functions Press MENU button on the panel or RC to enter Setting Menu.
announcement. At the end of the announcement the radio will return to its previous state ready for the next announcement. REG ON/OFF: When REG is available (On), the receiver accepts regional variants of the tuned station display. When REG is unavailable (Off), the receiver ignores regional variants. TA VOL: You can set the default volume of TA announcement. Support 50 levels. Default level is 50.
TV tuner operations Connect the TV antenna to the TV antenna jack on the rear of the unit. Select TV mode. To access the TV mode menu, press MENU button. To select a menu page (Auto Program or Manual Program) press UP/DOWN cursor buttons on the RC or VOL+/- buttons on the panel. To enter the selected page, press OK button on the panel or ENTER button on the RC.
Disc/USB/SD/MMC operations USB/SD/MMC notes USB functions (flash memory type) MP3 music play. SD/MMC card support, 2 in 1 (SD/MMC) support. USB flash memory. FAT 12/ FAT 16/ FAT 32 is possible FAT 12/16 (dir: 200 support, file: 500 support), FAT 32 (dir: 200 support, file: 500 support). Filename: 32 byte/ Dir name: 32 byte. Tag (id3tag ver2.0). Title/ Artist/ Album: 32 byte support. Multi card reader not support. USB 2.0 support. Note: USB format supports 2.0. Capacity: up to 8 Gb.
Note: When SD/MMC card and USB device are both inserted, the playing mode will be changed into the mode of the device inserted later. Play/pause The unit will automatically play from the first sound track recorded on a disc/SD/MMC/USB device. To ensure good system performance, wait until the unit finishes reading the disc/device information before proceeding. Press PLAY/PAUSE button on the RC or 1/PLAY/PAUSE button on the panel to pause playback, press it again to resume playback.
to start playback again. Playback will resume from the point it was stopped at. If you press STOP/PBC button on the RC or press and hold 1/PLAY/PAUSE button on the panel twice, playback will stop completely and can be resumed only from the beginning of the disc. Selecting tracks During playback press PREVIOUS button to play the beginning of current track, press it again to play the previous track. Press NEXT button to play the next track.
GOTO Press and hold AUDIO/GOTO button to show the playback parameters for the current chapter/track/time (track/title/chapter number or time). Press cursor buttons to navigate between the parameters and use number buttons to input needed settings. Press OK button on the panel or ENTER button on the RC to start playback from the set number or time. Random playback Press BND/RDM button on the RC or 4/RDM button on the panel to activate random playing mode. Press one more time to return to normal playing.
PBC (Playback Control) function (for VCD only) This function is only available for the VCD with PBC function. Press and hold STOP/PBC button on the RC to set PBC on/off; when PBC is off, the screen will show PBC menu if you switch PBC on. If the menu consists of a list of titles, you can select a desired one using number buttons on the RC. Changing angle (for DVD only) Press ANGLE button on the RC to playback images at different camera angles.
DVD Setup menu Press SETUP button on the RC to display setup screen, use LEFT/RIGHT cursor buttons and ENTER button to select the desired setup page: System, Language, Audio, Video, Digital. In the selected page select an option using UP/DOWN cursor buttons, then press RIGHT cursor button to go to setting list. Use UP/DOWN cursor buttons to select the needed setting. Press ENTER button on the RC or OK button on the panel to confirm.
Note: The rating can be selected only under the password unlocked status, and the limits can be worked only under the password locked status. Default If this item is selected, the unit will return to original setting. Language setup OSD language Select the language to be used for the on-screen display. Audio language Select the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk. Subtitle language Select the language to be used for the Subtitles.
Video setup Set a parameter with UP/DOWN cursor buttons: Brightness, Contrast, Hue, Saturation, Sharpness. Digital setup Dynamic range If watching large dynamic scope movie program at night, selecting this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sound. In this case, this doesn’t disturb the family and keep the quality sounds. When select FULL, the audio signal is minimal; when select OFF, the audio signal is maximal.
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer. Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car The fuse is blown. Replace the fuse. accessory switch the ignition key to “ACC”. No sound Volume is on minimum. Adjust volume to a desired level.
Specification General Power supply: Maximum power output: Storage support: Compatible formats: Unit dimensions/Net weight: ESP function: Temperature range: TFT display Screen size: Resolution: Aspect ratio: Contrast ratio: Brightness: View angle: FM Radio Frequency range: Usable sensitivity: Preset memory stations: AM Radio Frequency range: Preset memory stations: TV tuner TV standard: Quantity of channels: 12 V DC 4 x 50 W DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB/SD/MMC DVD-video/DVD-audio/SVCD/VCD/HDCD/MP3/C
! . . , ....................................................................................................34 ...................................................................................35 ..........................................................................................36 ...................................................................................37 ......................................................................................43 .............................................
, . . 1 1. . . , , . , , . . . , . , . 20 . . . . , , . . , . . , , , . , . . .
, , , , . , , , . 1. 2. 3. 4. 5. 6. 7. 8. ( ISO- : ( ) ) 1 1 1 1 1 1 1 1 1 2 1 4 1 1 1 1 1 36 . . .
, , . , . . , . , , , . 30°, . , , , , , , , , . . « » ( « ), « » ( » « » DIN DIN, , . 37 ).
« 1. 2. 3. 4. 5. 6. 7. 8. »( ) . . 1. , , , ) . 2. , . . 3. . . . 4. 5. . . .
– – – 1. 2. 3. . ). . , , . ( ). , , , , . , ( .). « »( ) . . 1. , (3) (2) 2. 3. 4. 5. . . . . ( : ). .
, . . , , . OPEN. , ; . , , . , . . . . : : , . . . , , . : , , 40 . .
A 1. 2. 3. 4. 5. 6. 7. 8. B +12 +12 ( ) 1. 2. 3. 4. 5. 6. 7. 8.
ISO A 1 2 3 4 5 6 7 8 - . . . . . . +12 .- . - . . . : . . . B (+) (-) (+) (-) (+) (-) (+) (-) - ./ . , , “Attention! You cannot use this function while driving” (“ “), . 42 .
1. 2. 1/PLAY/PAUSE 3. POWER/MUTE 4. MODE 5. VOLUME+ 6. MENU 7. BND 8. 6/DIR+ 9. NEXT 10. TFT11. OPEN 12. USB13. PREVIOUS 14. 2/INT 15. 3/RPT 16. OK 17. VOLUME18. AS/PS 19. 4/RDM 20. 5/DIR21.
1. 2. 3. 4. 5. EJECT ( ) RESET RESET , , 44 . .
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. ) MODE PWR BND/RDM ENTER/ STEREO/MONO PTY/PROG P.
1. 2. , (CR 2025 3V), . . . : . , . ( 6 – ). . . .
, ( ) RESET . ( , ); . : RESET . ( POWER/MUTE . OPEN), POWER . MODE => USB => : => , : => => AV IN. USB , . POWER/MUTE MUTE. MUTE . . VOL+/VOLVOLUME+/VOLUME- .
OK : BASS ( ) => EQ ( SEL ) =>TREBLE ( ) => FADER ( ) => BALANCE ). VOLUME+/- . ENTER . VOLUME+/VOLUME- OK . OK SEL . . : . , ( POWER , ) 3 . MENU . VOLUME+/- . ENTER OK . VOLUME+/VOLUME- , SEL MENU AUDIO ( ) Bass: Treble: Balance: . , OK . . . 10 . 10 . - 0. - 0. . . 10 .
Fader: . 10 . . FLAT => CLASSICS => POP => ROCK => DSP OFF ( ). )( /USB/ ) . 50 . - 25. . 50 . - 25. . 50 . - 25. . 50 . - 25. . 50 . - 25. . 15 . - 10. : 16:9 => 4:3 => FULL ( ). ( YES ( ) NO ( ) , ENTER OK ). RDS SETUP (« RDS») TA: SEEK/ALARM. TA SEEK, ; TA ALARM, , , PI: MUTE/SOUND. PI sound: , , PI . PI, . PI mute: . RETUNE: LONG/SHORT. Retune-S Retune-L – TA Seek. Retune S: , TA SEEK 30 Retune L: , TA SEEK 90 . Retune TA SEEK. MASK: DPI/ALL.
MASK DPI. , , , , EON TA: DX/LOCAL. EON TA LOCAL ( , MASK ALL. , ): , . EON TA DX ( ): , TA), REG: OFF-ON ( (EON . .- .). REG ON ( , PI- ): AF TA . REG OFF ( PITA VOL: , . 50 EXPERT DX: ): . . DX ( - 15. , ) LOCAL ( ). Stereo: Beep: STEREO ( ) MONO ( : 2ND ( ). ) => OFF ( ). Loud: (OFF) (ON) ( Backlight: : HIGH ( )/LOW ( Area: RUSSIA => EUROPE => U.S.A => SOUTH AMERICA. CLOCK ( ) Clock: (OFF) (ON) . Clock Hour: 1224. Clock adjust: . 50 ) => ALL ( ). )/MID ( ).
. BND/RDM BND : FM1 - FM2 - FM3 (OIRT) – MW1 (AM1) – MW2 (AM2). : PREVIOUS NEXT MANUAL. . PREVIOUS NEXT . : PREVIOUS NEXT , . , . 6 , (18 FM, 12 AM). , . . . : P.SCN/RPT , AS/PS . 6 6 , . . : , .
: , P.SCN/RPT AS/PS ; , . FM- STEREO/MONO , . . OSD RDS RDS ( PTY. ) . , , RDS . AF ( ) AF/TA BND AF. , , . . : RDS AF , , RDS. AF. TA (Traffic Alarm) AF/ ) TA. , TA.
, ). , . TP, , TA TA, TP, ; TP TA, . , . . MODE TP. , PTY ( AF/ , T . ) PTY/PROG (PTY), . . . ("PTY , “PTY NONE” "). MENU . VOLUME+/- RDS SETUP. ENTER OK . VOLUME+/VOLUMESEL ENTER , , OK . OK , MENU .
RDS SETUP TA ALARM/SEEK: ; PI SOUND/MUTE: PI sound: TA SEEK, TA ALARM, , PI , , . PI, . PI mute: . RETUNE S/L: Retune-S Retune-L – TA Seek. Retune S: , , TA SEEK 90 TA SEEK. MASK DPI/ALL: AF, , MASK DPI. , , , EON TA DX/LOCAL: EON TA LOCAL ( EON TA DX ( REG ON/OFF: REG ON ( , PIREG OFF ( ): PITA VOL: . 50 TA SEEK 30 Retune . , ): AF . TA 54 , , . (EON . . - 50. Retune L: TA , , MASK ALL. ): ): . , , , . , , TA), .
. . MENU. Program) OK VOL+/VOL- ENTER MENU AUTO PROGRAM ( System: BND Audio: Search: , AS/PS ) (SECAM/PAL). , (DK/BG/I). . (SECAM/PAL). (DK/BG/I). . . Manual . . . BND/RDM . ) , ON ( OK . P.SCN/RPT MANUAL PROGRAM ( Storage: System: BND Audio: Channel: ; Fine: Memory: . (Auto Program VOL+/VOLENTER . . PREVIOUS/NEXT . . ) OFF ( : ). .
/USB- • • • • USB/SD/MMC MP3 USB ( SD/MMC, 2 1 (SD/MMC). USB . FAT 12/ FAT 16/ FAT 32 FAT 12/ 16 ( 200 , 500 ), FAT 32 ( 200 , 500 ). : 32 : 32 . (id3tag ver 2.0) : 32 . ). . USB 2.0. : USB: USB 2.0. : 8 . SD/MMC: . . : 8 . . . . . , EJECT. , . . SD/MMC/USBSD/MMC USB- USB56 . .
MMC/SD USB. . : USB . , , ( /USB). , . 1/PLAY/PAUSE PLAY/PAUSE ; . MP3/DivX/JPEG , MP3/DivX/JPEG, : 1. 2. 3. 4. 5. 6. 7. 8. ( ) , ENTER . : AVI, . 2 AVI .
/USB/ 1/PLAY/PAUSE STOP/PBC . PAUSE PLAY/ , . . STOP/PBC 1/PLAY/PAUSE . PREVIOUS ; . . NEXT (0-9) PREVIOUS . NEXT . DVD/VCD PREVIOUS PLAY/PAUSE. , NEXT. : . ( ) A-B/ZOOM, . , ; . . P.SCAN/RPT, . ( , , ).
INT 2/INT , . . , . BND/RDM, , . . PTY/PROG, . , , ( ). PLAY/PAUSE , « » , ENTER OK . « », . ENTER OK , PTY/PROG, . OSD , , , ( PBC ( )( VCDSTOP/PBC , ). VCD) PBC. , , . 59 PBC.
A: X2 => B/ZOOM X3 => X4 => X1/2 => X1/3 => X1/4 => 6/DIR+ . 5/DIR- . AUDIO/GOTO; , , . . OK ENTER , . ( DVD) ANGLE , , . , . ( DVD) AUDIO/GOTO . , . ( DVD) SUB-T . , . ( VCD) AUDIO/GOTO => .
( DVD) MENU , . OK ENTER . ID3MP3 ID3-tag, . 61 .
DVD SETUP ; ENTER : , , , , , . . ENTER (NTSC, PAL, PAL60, OK . ). Audio type , . . . : . (interlace-S-Video). . 4:3 PS: 4:3 LB: 16:9: 4:3. 4:3, 16:9. – 0000. : . . : 62 .
. , 1 , , . 8: (1) (8) . . :8 : . . . . . DVD . . DVD : DivX [R] VOD: . . DivX.
. : , , , . , . .
“Full”, , “Off”, L), ( . : , ( (L+R).
, . , . , , . , . ( , ). . , , . . . . ( . ), . , , . . , , . .
, , , . , . . . ”. . . . . . 35 , “ . 35 , . . . . , . . .
. . . . , . . . RESET. . . . .
12 4 x 50 DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB/SD/MMC DVD-video/DVD-audio/SVCD/VCD/HDCD/MP3/CDDA/PictureCD/Photo-CD/JPEG/MPEG4 (DivX/XviD) 180 x 175 x 50 /1,55 8 DVD, 40 CD, 120 3 -200C - +600C 3 320 (RGB) x 240 16:9 400:1 2 250 0 120 FM65 <15 18 – 74 AM522 – 1620 12 SECAM/DK 69 /87,5 – 108
30 . . ! , . 2019) , , ( .
