SM-CMD3009 MULTIMEDIA DVD/CD/MP3 RECEIVER with built-in 3.5” TFT display Instruction manual DVD/CD/MP33.
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ............................................................................................... 2 Important safeguards ......................................................................................... 3 Accessories........................
Important safeguards Read carefully through the manual to familiarize yourselves with this unit. Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit. “CLASS 1 LASER PRODUCT”. This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product.
Accessories Receiver Front panel Remote controller Front panel protective case ISO cable Installation parts: Release keys Screw 5 Screw 25 Flat washer Spring washer Metal strap Nut Consumer information Warranty card Instruction manual 1 1 1 1 1 pc pc pc pc pc 2 1 1 2 2 1 1 1 1 1 pcs pc pc pcs pcs pc pc pc pc pc 4
Installation/connection Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring and make sure that the unit works properly. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. 2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place. 3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands. 4.
2. DIN REAR-MOUNT (Method B) For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets. 1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side. 2. Screw. 3. Factory radio mounting brackets. 4. Vehicle dashboard. 5. Lock (remove this part). Note: The outer trim frame and mounting sleeve are not used for method of installation.
Electrical Connection Connector A 1. 2. 3. 4. Memory +12V 5. Auto antenna output 6. 7. +12 V (to ignition key) 8. Ground Connector B 1. Rear right speaker (+) 2. Rear right speaker (-) 3. Front right speaker (+) 4. Front right speaker (-) 5. Front left speaker (+) 6. Front left speaker (-) 7. Rear left speaker (+) 8.
ISO Connection table Location Function Connector A 1 2 3 4 5 6 7 8 Connector B Rear right (+) - Blue Rear right (-) - Blue/White Front right (+) - Grey Front right (-) - Grey/White Front left (+) - Green Front left (-) - Green/White Rear left (+) - Brown Rear left (-) - Brown/White Battery +12V/Yellow Auto Antenna/Orange Ignition/Red Ground/Black Note: Power antenna wire is intended for power supply of the antenna and for remote control of an additional amplifier.
Reverse driving cable connection If the rear view video camera is connected, the unit automatically switches to camera picture during reverse driving. The unit returns to the original work mode after the reverse driving is done.
Unit controls Front panel 1. POWER/TFT OFF button 2. BND/NP/SUB button 3. PREVIOUS button 4. AF button 5. TA button 6. Display 7. OPEN button 8. USB port 9. AUDIO/TYPE/APS button 10. MOD/MUT button 11. NEXT button 12. PTY/PLAY/PAUSE button 13. VOLUME regulator/SELECT button 14. CLK button 15. IR sensor 16.
Inner panel 1. Disc loading slot 2. SD/MMC memory card slot 3. RESET button (hole) 4. Panel status indicator 5. EJECT button Pressing RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you flip down the panel and flashes when you remove the panel.
Remote controller (RC) 1. SETUP button 2. POWER button 3. ANGLE button 4. ZOOM button 5. STOP button 6. PROG button 7. STEREO button 8. Cursor (UP/DOWN/LEFT/RIGHT) buttons 9. REPEAT button 10. AMS button 11. TITLE button 12. OSD button 13. Number buttons 14. SLOW button 15. MODE button 16. SUB-T button 17. MEN/PBC button 18. PLAY/PAUSE button 19. LOCAL button 20. RANDOM button 21. ENTER button 22. SYSTEM button 23. BAND button 24. MUTE button 25. SEL button 26. AUDIO button 27. VOL+/VOL- buttons 28.
Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote controller (pic.2). Pic. 1 Pic. 2 Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button (hole) with a pointed object, such as a ballpoint pen, to set the unit to initial state. Note: When some errors occur, you can also press RESET button to resume to normal, and it will erase some memorized functions. Turning the unit on/off Press any button on the panel or the RC (except OPEN button) to turn on the unit.
Mute function Press MUTE button on the RC or press and hold MOD/MUT button on the panel to turn off the sound. Or touch MUTE icon available in SOUND page or in Radio interface. “MUTE ON” appears on the display. Press the button again or adjust volume to resume the sound output. Volume control Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to decrease or increase sound volume level. Or touch + and – icons referring to VOL item in SOUND page.
Clock setting Press CLK button on the panel to show the time on the display. Press and hold it, the hour will be in yellow. Rotate VOLUME regulator on the panel or press VOL+/VOL- buttons on the RC to adjust the hour. Press SEL button on the RC or SELECT button on the panel, the minute will be in yellow. Rotate VOLUME regulator on the panel or press VOL+/VOL- buttons on the RC to adjust minutes. Press CLK button to confirm.
ON/SUB OFF. Or press and hold BND/NP/SUB button on the panel to switch on or off the subwoofer output. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect. Note: An external amplifier is required to operate the subwoofer. AUX in jack AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
Radio operations Touch screen In Radio mode touchable interface is available enabling you to perform various operations. The touch menu consists of two pages. Touch icon in the right bottom part of the screen to switch between two pages. Band select Press repeatedly BND/NP/SUB button on the panel or BAND button on the RC or touch repeatedly BND icon on the screen to select your desired radio band in Radio mode: FM1, FM2, FM3, AM1 (MW1), AM2 (MW2).
Mono/Stereo control (in FM radio mode) Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows ST ON (ST OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between ST ON/OFF. ST ON means stereo reception of the signal; ST OFF means mono reception mode. Or press STEREO button on the RC or touch MO/ST icon on the screen to switch stereo reception on/off.
In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to the previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not switch off the TA mode.
RC or rotate VOLUME regulator on the panel to choose the needed option. After choosing, please leave the unit idle to activate. TA ALARM/TA SEEK: In TA SEEK mode, the unit will seek for traffic announcement program; in TA ALARM mode, the alarm is set off. Or you can touch TASET icon on the screen to switch between TA ALARM/TA SEEK. PI SOUND/MUTE: Choose either PI sound or PI mute. PI sound refers to the reception noise when the AF function tries to scan alternative frequency.
Disc operations Touch screen In Disc/USB/Card mode touchable interface is available enabling you to perform various operations. The touchable menu is available if during playback you touch the screen in the bottom. The menu is displayed in the bottom part of the screen and consists of three pages.
MP3/DivX/JPEG file playback When you insert a storage containing MP3/DivX/JPEG files, the screen will show following interface: 1. Folder list 2. Audio file icon 3. Current file info 4. Photo file icon 5. Video file icon 6. File list You can select the needed folder or file by pressing cursor buttons. Press ENTER button on the RC or touch OK icon on the screen to confirm your selection.
Fast forward/rewind Press and hold repeatedly PREVIOUS or NEXT button on the panel or on the RC or touch Rewind or Fast forward icon for fast backward or forward playing correspondingly. With each pressing the playback speed will increase as follows: x2 => x4 => x8 => x20 => Normal. While fast playback, press PLAY/PAUSE button on the RC or touch Play/pause icon to resume normal speed.
Zooming in/out During playback of video or images, press repeatedly ZOOM button on the RC or touch Zoom icon, the picture will be zoomed in the sequence: X2 =>X3 =>X4 =>X1/2 => X1/3 => X1/4 => Normal. When the image is zoomed in, you can move it by pressing cursor buttons. Slow playback During playback press repeatedly SLOW button on the RC to select the speed of slow playback: 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7 => Normal.
Menu navigation Press MEN/PBC button on the RC or touch Menu icon to activate the disc menu list on the screen. Choose the desired item with cursor buttons. Press ENTER button on the RC or touch OK icon to confirm the selected item and start playing. When playing a DVD, press TITLE button on the RC or touch Title icon to go to the title list of the disc. Note: Title and menu are only available if the disc has these functions.
USB/SD/MMC operation USB/SD/MMC notes USB format supports 2.0. Capacity: up to 32 Gb. For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used with this unit. Avoid using memory cards of unknown brands. Capacity: up to 32 Gb. Inserting SD/MMC card/USB device Insert an MMC/SD card or a USB device into MMC/SD slot or USB slot. Then the playing mode will be changed into Card or USB mode automatically. The first card/USB device track playback will start.
Setup menu Press SETUP button on the RC to display setup screen, use LEFT/RIGHT cursor buttons and ENTER button to select the desired setup page: System, Language, Audio, Video. In the selected page select an option using UP/DOWN cursor buttons, then press RIGHT cursor button to go to setting list. Use UP/DOWN cursor buttons to select the needed setting. Press ENTER button on the RC to confirm. System setup TV system: Select the TV system in the setting menu (NTSC, PAL, AUTO).
Language setup OSD language: Select the language to be used for the on-screen display. Audio language: Select the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk. Subtitle language: Select the language to be used for the subtitles. You can select a preferred subtitle from those included in the DVD video disk. Menu language: Select the language to be used for the Menu. You can select a preferred audio from those included on the DVD.
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer. Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car The fuse is blown. Replace the fuse. accessory switch the ignition key to “ACC”. No sound Volume is on minimum. Adjust volume to a desired level.
Specification General Power supply: Maximum power output: Storage support: Compatible formats: Unit dimensions/Net weight: Gift box dimensions/Gross weight: ESP function: Temperature range: TFT display Screen: Resolution: Aspect ratio: Contrast ratio: Brightness: View angle: FM Radio Frequency range: Usable sensitivity: Preset memory stations: AM Radio Frequency range: Preset memory stations: 12 V DC 4 x 50 W DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB, SD/MMC DVD-video/DVD-audio/SVCD/VCD/CDDA/HDCD/MP3/PictureCD/
! . . , ....................................................................................................34 ...................................................................................35 ..........................................................................................36 ...................................................................................37 ......................................................................................44 .............................................
, . . , 1. . , 1. , . . . , . . , . , . . . 20 . . , , . . , . . , , , . , . . .
, , , , . , , , . ISO : 5 25 1 1 1 1 1 2 1 1 2 2 1 1 1 1 1 36 . . .
, . , . , . , , , . , . , , , , « , , . , « » ( » ( » « » DIN DIN, , . 37 , . « ), 30°, . ).
« 1. 2. 3. 4. 5. 6. 7. 8. »( ) . . 1. , , , ) . 2. , . . 3. . . . 4. 5. . . .
– – – 1. 2. 3. . ). . , , . ( ). , , , , . , ( .). « »( ) . . 1. , (3) (2) 2. 3. 4. 5. . . . . ( : ). .
. . . , , . OPEN, . . , , . , . . . . : : , . . . , , . : , , 40 . .
1. 2. 3. 4. 5. 6. 7. 8. A +12 +12 ( ) 1. 2. 3. 4. 5. 6. 7. 8.
ISO A 1 2 3 4 5 6 7 8 - . . . . . . +12 .- . - . . . : . , , “), . . . . B (+) (-) (+) (-) (+) – (-) (+) (-) - “Warning! Please stop watch video player” (“ ; 42 .
( ) , . .
1. POWER/TFT OFF 2. BND/NP/SUB 3. PREVIOUS 4. AF 5. TA 6. 7. OPEN 8. USB9. AUDIO/TYPE/APS 10. MOD/MUT 11. NEXT 12. PTY/PLAY/PAUSE 13. VOLUME/ 14. CLK 15. 16.
1. 2. 3. 4. 5. ( SD/MMC ) RESET EJECT RESET , , 45 . .
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
1. 2. , (CR 2025 3V), . . . : . , . ( . . 47 –6 ). .
( : , ) RESET RESET . . ( POWER/TFT OFF . MODE : (SD) => AUX. => . , : , TV USB SOUND ( ). SETUP SETTINGS SOUND Radio Aux. ) , OPEN), MOD/MUT (DVD) => USB => (Main) . . SETTINGS ( . ; . , Bluetooth SETTINGS Aux. 48 SOUND POWER .
MOD/MUT MUTE MUTE ON. . . VOLUME SOUND. VOLUME + –, : OFF. . VOL+/VOL+ –, . SELECT ) =>TRE ( BAS ( => FAD ( MUTE SOUND SEL ) => BAL ( , , . ). : ) VOL+/VOLSOUND. , SELECT SEL VOL+/VOLVOLUME : POP => ROCK => CLASS => FLAT => EQ OFF ( EQ SOUND. . 49 VOL . . EQ ).
SELECT LOUD ON (OFF). (ON) SEL VOL+/VOL(OFF) . SOUND. BMP (Best Music Position) SOUND Double Bass MBP, , SELECT CLK VOL+/VOL; , . ) Beep VOL+/VOL- . VOL+/VOL- , SOUND, SEL SOUND COLOR1 (COLOR2). , , ) , + . . . COLOR1 ( VOLUME . VOLUME CLK HOUR ( ) MIN BEEP ON (OFF). ). Beep. SEL ) 50 VOLUME SEL . , SELECT LOUD (R) DBAS ). –, BEEP ON ( BEEP OFF ( (L) . Double bass ( ; VOLUME , COLOR2 ( BEEP . VOL+/VOL- ).
, . POWER/TFT OFF . , SETTINGS Contrast ( ), ON (SUB OFF). ). . : ), SELECT SUB ON ( . Color VOLUME . ( ) BND/NP/SUB . ( Brightness ), )/SUB VOL+/VOLOFF ( SUB , . . . . –, Hue SEL AUX AUX , + .
, . BND/NP/SUB . 3 FM- : MW1 (AM1), MW2 (AM2). 6 ( 30 ). : CH+/CH- , : PREVIOUS/NEXT , . , 6 (P1 – P6), . : FM1, FM2, FM3 PREVIOUS/NEXT . (1 - 6), . BND W (AM) 2 CH+/CH- . 6 , . . . AMS SCAN. 6 BAND . : AUDIO/TYPE/APS APS.
: ON (ST OFF). 1~6. . AUDIO/TYPE/APS APS. ( FM SELECT , 5 . ) SEL VOLUME (ST ON) (ST OFF). MO/ST. OFF ( RDS SELECT RDS RDS ( AF ( , VOL+/VOL- ; LOCAL ST , STEREO SEL VOLUME LOC ON ( ). VOL+/VOL- , . ON (LOC OFF). AMS INTRO. ) , , LOC LOC LOC/DX. , ) . . , ) , . 53 , .
AF , , RDS AF, AF. , ) TA. , TA; Pop, Rock 2 Easy, Light 3 Classics . , TA. . ) RDS, PTY/PLAY/PAUSE . . PTY/PLAY/PAUSE . . . 1 . TA TA. . . ; , PTY ( , RDS AF. TA ( FM- AF. AF , , 1-6, 1-6, News, Affairs, Info Sport, Educate, Drama Culture, Science, Varied 54 .
4 Jazz, Country 5 Nation, Oldies 6 Folk , , Weather, Finance, Children Social, Religion, Phone IN , , , , , Travel, Leisure, Document PTY , ; . , . . SELECT , VOLUME VOL+/VOL. TA SEEK/TA ALARM: PI SOUND/MUTE: PI sound: PI TA; , , , TA SEEK TA ALARM: , TA ALARM , . PI, 55 . , . . TASET. SEL .
. PI mute: . RETUNE L/RETUNE S: «RETUNE» . «S» ; «L» RETUNE L RETUNE S : Retune TA TA SEEK. MASK DPI/MASK ALL: AF ( ), , , . , MASK DPI . MASK ALL , , RDS. MASK ALL MASK. 56 . RETUNE. MASK DPI.
USB /USB/ , . . 3 . , : . Play/pause Audio Menu Stop OSD Angle Rewind Repeat Fast forward Title Previous Subtitle Next NUM ( OK ( ) : ) Zoom . . . . .
, MP3/DivX/JPEG, : 1. 2. 3. 4. 5. 6. , . . OK. , -, ) , ENTER OK ( : 2 . MP3/DivX/JPEG ENTER . EJECT. , ( ). AVI- , . . PLAY/PAUSE STOP 58 AVI . , Play/pause, Stop. .
PREVIOUS ( Next Previous (0-9) PREVIOUS Fast Forward Rewind => x4 => x8 => x20 => PLAY/PAUSE ( . ). . NEXT Play/Pause REPEAT GOTO; : x2 . Repeat, , RANDOM , . NEXT PREVIOUS . NEXT . , , , ). . . , . , . . PROG, ( 59 , ENTER . ).
« » PLAY/PAUSE, « PROG, OSD , ). ENTER », ENTER . OSD , , . . , , ( ZOOM Zoom : X2 => X3 => X4 => X1/2 => X1/3 => X1/4 => . . SLOW , : 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7 => PLAY/PAUSE . PBC ( MEN/PBC , ( DVD) ANGLE VCD- )( , VCD) 60 PBC. PBC. Angle, , . Play/Pause , . , . .
( DVD) AUDIO SUB-T : ( DVD) VCD CD => ID3- MP3 ). AUDIO Audio . BND/NP/SUB Menu, DVD . ENTER OK. TITLE , ID3-tag, . 61 . . SYSTEM DVD) MEN/PBC : . => . . Subtitle , (NTSC/PAL/PAL60/ ( Audio , .
USB- SD/MMC USB/SD/MMCUSB 2.0. USB: SD/MMC: : 32 . . . USB/SD/MMCUSB , . USB , , MOD/MUT USB SD/MMC . USB- « 62 : 32 . . . MODE , , ». .
SETUP ENTER . : . PS: 4:3 LB: : . . . 16:9: : 0000 , , ). . 4:3. 16:9. . . 0000. , , . , : , 4:3, . : , . (NTSC, PAL, : 4:3 . ENTER : ; : . . . 63 , . .
: : : DVD . DVD . : : SPDIF/RAW: . . . . , . , MPEG. SPDIF/PCM: , : , : . . Dolby Digital, DTS 2- . .
, . . , , . . , . . . ( . , . . , . ), . , . , . , ( ). , , , .
, , , , . . . ”. . . . . . 35 , “ . . 35 , . . . . , . . .
. . . . , . . . RESET. . . . .
12 4 50 DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB, SD/MMC DVD-video/DVD-audio/SVCD/VCD/CDDA/HDCD/MP3/PictureCD/Photo-CD/JPEG/MPEG4 (DivX/XviD) 178 178 51 /2,1 220 294 100 /2,35 8 DVD, 40 CD, 120 3 -200C - +600C 3,5 , 960 x 240 16:9 400:1 2 300 0 120 “Touch screen” , 1200 FM 87,5 12 18 – 108 AM 522 – 1620 12 . .
