SM-CMD3001 MULTIMEDIA DVD/CD/MP3 RECEIVER WITH BUILT-IN 3” TFT DVD/CD/MP3Instruction manual 3” TFT-
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents.............................................................................................................................2 Important safeguards ...................................................................................................
Important safeguards - - Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Installation/Connections First complete the electrical connections, and then check them for correctness. Installation It is an anti-theft installation way. The chassis wear a metal sliding housing. Please have the wiring connection of the power supply, speakers and antenna as for the requirement of the manual, and then install the metal sliding housing into the car according to the diagram.
Attaching the control panel 1. 2. 3. Insert the left side of the control panel into the shaft of the main unit. Push the panel to the left and insert the right side of it. Press the right side of the panel until a “click” sound is heard. Detaching the front panel 1. 2. Press the OPEN button on the front panel. Hold and slide the panel to the left and pull it towards you. Caution: The control panel can easily be damaged by shocks.
Connection diagram 6
Notes: - In spite of having any kinds of speaker system, use 4 ohms impedance of speaker to reduce the distortion during high volume level. - It is prohibited to make the conductors of auto antenna and ground touch with each other. - For your driving safety, please link your brake detecting wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play DVD or VCD disc. A caution phrase will be displayed on the screen.
Panel controls Front panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
Inner panel The front panel of this unit can be detached to show the inner panel with disk slot. Press EJECT button to open the inner panel. To unload the disk press EJECT again To set the unit to the initial settings press RESET button. 14. SD-slot 15. RESET button 16.
Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button, then press the RESET button with some sharp object to restore the unit to the original factory settings. Power button Press SOURCE button on the front panel or PWR button on the RC to switch the unit on. Press and hold SOURCE button on the front panel or press PWR button on the RC to switch the unit off.
Radio operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. BAND selection Press BAND button on the panel or on the RC repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2. Auto/Manual tuning - Press and hold LEFT/RIGHT buttons on the panel or PREV/NEXT buttons on the RC to choose either manual or auto search.
- Hold UP/DOWN cursor buttons to store a station. To recall a station: - Select a band (if needed). - Press UP/DOWN cursor buttons to recall the stored station. Mono/Stereo selection Press the ST/RPT button on the RC to select ST OFF (Mono) or ST ON (Stereo) mode. TA (Traffic Announcement) function Press the TA button on the RC or on the panel to turn on or turn off the TA function. When the traffic announcement is found the tuner will switch to this station automatically.
DVD/CD operations Disc glossary PBC (PlayBack Control) PBC is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc.
Inserting the USB device Insert the USB device into USB jack. Press SOURCE button on the RC to go into USB mode. The first USB device track playback will start. Note: USB functions (flash memory type) MP3 music play FAT 12/FAT 16/FAT 32 is possible - FAT 12/16 (dir: 200 support, file: 500 support), - FAT 32 (dir: 200 support, file: 500 support). Filename: 32 byte/ Dir name: 32byte. Tag (id3tag, English) - Title/Artist/Album: 32 byte support. USB format supports 2.0. Capacity: up to 2 GB.
Stop playback During MP3/MPEG-4/USB mode, press STOP button on the RC to stop the playback. Press it again to resume the playback. During VCD/CD mode, press STOP button to pause playing, press PLAY/PAUSE to play, and press STOP button twice to stop playing completely. To start playing, press PLAY/PAUSE button. Using the number buttons Press the numbered buttons on the RC to insert the track/chapter number. Select a track by using Number buttons 0~9. The selected track will be played automatically.
Selecting subtitle language (for DVD only) If DVD disc supports multi-subtitle playback, press SUB-T button on the RC repeatedly to switch among languages. OSD (OnScreen Display) function Press OSD button on the RC repeatedly to show the current track/chapter, current time on the display. Title playing (for DVD only) - During DVD mode, press TITLE/PBC button on the RC to activate the disc title list on the screen.
Audio/Video/Picture file operations Insert the CD with mixed files (.mp3, .jpeg, .wma, mpeg4 files), press STOP button. Category/ Folder/ File list will be displayed on the screen, and file/folder name being played will be displayed on top. Current selected item will be highlighted. Category Select 1. Use LEFT/RIGHT cursor to select the category: AUDIO PICTURE 2. Press ENTER to confirm. VIDEO. File select 1. Use UP/DOWN/LEFT/RIGHT cursor buttons to select desired file. 2. Press ENTER to playback. 3.
Operating with System Menu To enter the System Setting Menu press MENU button. You will enter Menu pages for Video Mode, Audio Mode and System Mode using UP/DOWN/LEFT/RIGHT cursor buttons. Video Mode You may adjust the settings: BRIGHT, COLOR, CONTRAST, TINT, V.MODE (STAN => SOFT => USER). Audio Mode You may adjust the settings: BASS, TREBLE, BALANCE, FADER, EQ (NORM => ROCK => JUZZ => CLAS => POP). System Mode You may adjust the settings: LOUD, BEEP, TOPIC, TIME DISP, TIME ADJ.
MP3 & WMA overview Notes on MP3 and WMA: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write. The unit can not read an MP3 file that has a file extension other than “.mp3”. If you play a non- MP3 file that has the “.
- - You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. In this case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended. Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required.
System setup menu 1. 2. 3. 4. 5. 6. Press the SETUP button on the RC to display the system setup menu. Use LEFT/RIGHT cursor buttons on RC to select the desired menu: System setup, Language setup, Video setup. Press ENTER to enter it. Use the UP/DOWN cursor buttons to select the needed setting. Press RIGHT to enter the setting adjustment sub window. Press the UP/DOWN cursor buttons to select the option of the setting and press ENTER to confirm it.
Language setup OSD language Select the OSD language. Audio language Select the audio language (if DVD disc supports several audio languages). Subtitle language Select the subtitle language (if DVD disc supports several subtitle languages). Menu language Select the DISC menu language (if DVD disc supports several menu languages). DIVX language Select DIVX language (if DIVX disc supports several languages). Note: The unit supports DIVX disc formats: 4.0, 5.0, 6.0.
Accessories Receiver Remote control ISO connector Frame Mantle Keys Customer information Warranty card Instruction manual 1 1 1 1 1 2 1 1 1 pc pcs pcs pcs pcs pcs pc pc pc Back view camera This unit is equipped with back view camera output. The camera is used to observe the situation behind the vehicle when you are backing the car. Please connect your back view camera with the back car video input. And connect the detecting wire for back a car with the rear gear light.
Anti-theft system This unit is equipped with a slide-down detachable and mask panel. Panel can be detached and taken with you, helping to deter theft. Handling compact discs - Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Symptom No power Cause The car ignition is not on. Disc cannot be loaded. The fuse is blown. Presence of CD disc inside the player. Disc cannot be read. Inserting the disc in upside down. Compact disc is extremely dirty or defective. Temperature inside the car is too high. No sound The buttons do not work. Sound skips. The radio does not work. The radio station automatic selection does not work. Volume is in minimum. Wiring is not properly connected.
Specification General Power supply Maximum power output Fuse Dimensions (L x W x H) Supported storages Supported formats FM stereo radio Frequency range Storable stations Display Display Aspect ratio Video system Resolution Brightness Contrast View angle AM Section Frequency range Storable stations Line out 12 V DC 50 Wx4 channels 10 A 187 x 50 x 170 mm DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC DVD/SVCD/VCD/MP3/MP4/WMA/CDDA/JPEG/MPEG4 87.5 - 108.
! . , . , ................................................................................................................................. 28 ............................................................................................................... 29 ............................................................................................................... 30 .................................................................................................................. 34 ...................
- , . - . - , . , . . - , , , - . . , . - , , . - , . - , - , . , . , , , . - , . , , . . , . . , . - 29 .
, . . , , . .
1. 2. 3. . , 1. 2. REL . . . . . : : . , , . . , . : , 31 , . .
: - , , . . , .
1. 2. 3. 4. 5. 6. 7. USB 8. 9. 10. 11. 12. 13.
. . , 14. SD15. 16. RESET.
1. 2. 3. 4. 5. 6. 7. 8. 9. PWR SUB-T DI +/- ( ) +/-/PREV/NEXT/SEL CLK N/P/ANGLE PLAY/PAUSE R/L/LANGUAGE ENTER/ 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. OSD SETUP / AF TA PTY GOTO TITLE/PBC STOP EQ ST/RPT APS/PRG BAND/RDM MUTE SOURCE (CR2025). - - , + 36 -.
. RESET OPEN, . . SOURCE PWR , . SOURCE PWR , . VOL , . , . SOURCE, => BACK VIEW => INPUT. : RADIO => DISC => SD => USB MUTE, EQ . , , ( . : NORM => ROCK => POP => CLAS. ), MENU . (System mode), . , .
: RDS ( ) RDS . , . BAND FM1, FM2, FM3, AM1, AM2. , : PREV/NEXT - . - , NEXT/PREV , - , . NEXT/PREV . , , . . APS 2 , , . , APS APS/PLAY/PAUSE 6 PWR. . 6 . APS/PLAY/PAUSE , , APS 4 . APS/PLAY/PAUSE 38 , .
30 (18 FM, 12 AM), . : - , ( ). NEXT/PREV . , ( - : . ). , ST/RPT . , ST OFF ( TA ( ) ST ON ( ). ) , - . , . AF ( ) AF, RDS AF. , . . PTY ( ) 1. PTY, , 2. PTY , CD , , PTY , , , .( PTY . CLK RDS ( ). CLK , 39 ).
DVD/CD PBC ( ) – , PBC, . . . : 1 . 3 ( ), 1, , 2 3. . : , . . : , . – , . , , . : CD/DVD/DVD±R/CD-R/-RW. : DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG. : ISO 9660 : MP3 (*.mp3) WMA (*.wma) : MPEG 2(*.vob) MPEG 1(*.dat) : JPEG (*.jpg) ISO 9660 + Joliet - 30 MP3 ). P3 : . 8 : 32 - 320 48 ( 44,1 ( 128 ). : *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, . 40 DRM.
USB USB USB. SRC/PWR SOURCE, . USB. : FAT 12/ FAT 16/ FAT 32 FAT 12/ 16 ( 200 , 500 ), FAT 32 ( 200 , 500 ). : 32 : 32 . (id3tag ) : 32 . USB: USB 2.0. : 2 . - SD/MMC . SD . SOURCE, SD. SD: Sharp, Samsung, MMC: . : 2 SD . . MMC : 2 : Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, . : Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, . OPEN - , . , . - - . , EJECT PLAY/PAUSE STOP , APS/PLAY/PAUSE . . . , , , . , . PLAY/PAUSE , PLAY/PAUSE, 41 .
MP3/MPEG4/USB: PLAY/PAUSE, VCD/CD : PLAY/PAUSE, . STOP . . STOP , . STOP ( , . ) 0-9. . NEXT PREV . . PREV/NEXT . - ST/RPT DVD => REP OFF ( ). MP3 => REP OFF ( ). VCD/CD ). : REP CHAPTER ( : REP ONE ( ) => REP DIR ( : REP ONE ( R/L/LANGUAGE DVD , VCD , ), STEREO ( ). ) => REP ALL ( ) ) => REP ALL ( ) ) => REP ALL ( BAND/RDM , . - : ) => REP TITLE ( : , ) =>REP OFF ( . .
N/P/ANGLE, : NTSC => PAL => AUTO. ( DVD DVD ) , SUB-T , . OSD , . - DVD DVD, TITLE/PBC . , - . PBC ( )( VCD . 1. VCD ) PBC, PBC , . 2. , . 3. , ENTER, 4. 5. STOP, . PBC, 1. 2. . . DVD/VCD/CD . ) => Audio ( GOTO , , : Title ( )( ). 3. .
4. ENTER, . ( APS/PRG VCD/CD , , PLAY. , , . . ENTER, . . (.mp3, .jpeg, .wma, mpeg4), , . 1. STOP. : AUDIO 2. ) PICTURE VIDEO. ENTER, 1. 2. 3. . , ENTER STOP, . . . ID3 ID3 ID3, ID3 1.0. MP3/WMA . ID3 , , , . 44 .
MENU. , . VIDEO ( CONTRAST ( USER) ( AUDIO ( ) ), TINT ( , , BRIGHT ( ), V.MODE ( ). ), COLOR ( ), ) (STAN, SOFT, ) : BASS ( ), TREBLE ( ), BALANCE ( ), FADER ( ) (NORM, ROCK, JUZZ, CLAS, POP ( , , , ), EQ , )). : LOUD ( ), TIME ADJ ( BEEP, TOPIC, TIME DISP ( ).
3 WMA 3 - WMA: 3 MPEG 3 . 3 3, 3, “.mp3”. 3 , , “.mp3”, . , - PC “ ” “ MP3” “ ”, . 8, 256. . . - , , . VBR: 8 , . WMA . ID3 WMA , WMA (Windows Media Audio) – Corporation. , , 64 3. VBR, . , , - “ ” - - CD-RW. ISO 9660. . 3, - - , CD-ROM, CD-R Microsoft , , ) ( ). , . CD-R - 44,1 CD-RW, 128 . 46 MP3 .
, - ISO 9660, 8, ( . , , , MP3 CD-R . CD-RW 3 - 3 , CD-R . - ). CD-R - 3. CD-RW . CD-R CD-RW . 16 . , , . 1. ID3TAG.
1. 2. SETUP , , . , , : . 3. 4. 5. 6. , . , , . . , ENTER, , . : , . NTSC: PAL: , , , , . . , 4:3 . T PS: , , 4:3 LB: . , , , 16:9: . . . . . . 48 OK, – 0000.
. , , . , . . . . , , . , . , , . . DIVX DivX, : DivX. : 4.0, 5.0, 6.0. DIVX , , , .
1 1 1 1 1 2 1 1 1 ISO . . . . : 1. 2. SOURCE . Back View ( , , . . 50 . ).
, - ( - ). , . - , . , - , . - ( ). , . - , , . , - . , . CD - CD 3 . 3 (8 , , , CD . . . ). , , ; , . , , , . , . , . .
. , « . . . ». , . . . . . , . . . . . . RESET. . . . 30 , . 30 . . . . . . . .
( 12 , 50 4 10 187 50 170 DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC DVD/SVCD/VCD/MP3/MP4/WMA/CDDA/JPEG/MPEG4 ) FM 87,5 – 108,0 18 M 522 – 1620 12 316:9 PAL/SECAM/NTSC 480 x 234 2 350 300:1 : 1100, : 1200 RCA- TFT (2V) . .
