User Guide

Setting Up
30
User Interface Setup
You can setup user interface parameters.
1
Press the [MENU] button.
 MENU screen appears.
2
Touch [ ].
 SETUP screen appears.
3 Touch [User Interface].
 User Interface screen appears.
4
Set each item as follows.
■ Beep
T
urns the key touch tone on or off.
Default is “OFF”.
■ Language
Selects a language.
■ Steering Remote Controller
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
■ Clock Adjust
Adjust the dat
e and time manually. (P.7)
Special Setup
You can setup Special parameters.
1
Press the [MENU] button.
 MENU screen appears.
2
Touch [ ].
 SETUP screen appears.
3 Touch [Special].
 Special screen appears.
4
Set each item as follows.
■ DEMO
Set the demonstration mode. Default is “ON”.
■ Sof
tware Information
Check the software version of this unit.
(P.34)
■ Open Source Licenses
Displays the open source licenses.
■ Initialize
Touch [Initialize] and then touch [Ye s ] to set
all the settings to the initial default settings.
Ñ
Software Information
Check the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
[ ]