Quick Start Guide

Continued on the next page...
DAB Basic Operation
1
Press the <8MENU> button.
2
Touch [DAB].
Ñ Source control screen
2
1
3
1
2
[DAB] : Switches the DAB band.
“DAB1”, “DAB2”, “DAB3”
3
Ñ Auto seek
Ñ Select a service
DAB Setup
1
Touch [ ].
2
Set each item as follows.
[TI]
[ ]
[ ]
[Announcement Select]
3
Touch [6].
!B5K-0673-01_K_EnFrEs.indb 5 2019/04/11 14:59
DAB
Displays the information of the current station:
Service Name
[E] [F] : Tunes in a ensemble, service, and
component. The seek mode switching can be
changed.
[ ] :
• Recalls the memorized service.
• When touched for 2 seconds, stores the
current service in memory.
[DLS] :
Display the Dynamic Label Segment
screen.
Switches to the traffic information
the traffic bulletin starts.
“ON”, “OFF” (Default)
automatically when
Searches for a program by program
type.
Priority
If the same service is provided by
when reception of
Digital
Radio becomes poor, automatically
to Radio Data System.
“ON”, “OFF” (Default)
PTY
Radio Data System
the service being provided by
switches
Switches to the set Announcement service.
When the service for which ON is selected starts,
switches from any source to Announcement to
receive it.
Related
Service
When you select ON, the unit switches
service (if exists) when a
available.
“ON”, “OFF” (Default)
[ ]
to a related
DAB service network is not
[ ]
Antenna
Power
Sets power supply to the Digital Radio antenna. Set
to “ON” when the Digital
equipped with a booster.
Default is “ON”.
Radio antenna in use is
[ ]
Service List
Displays the Service List screen.
1 Press <E>/<F> to search for an ensemble
automatically.
“Auto Seek” appears.
Press and hold <E>/<F> repeatedly to
search for an ensemble manually.
“Manual Seek” appears.
2
1
2
Touch [ ].
Touch [ ].
Service List
Select the desired content From the List.
Presetting stations
6