User's Manual
13
Sound/Display/Other Settings
Select a preset equalizer (EQ)
Press EQ repeatedly to select a preset sound mode — [Flat] (default)/[Pop]/
[User]/[Techno]/[Rock]/[Classic]/[Jazz]/[Optimal]. (Corresponding sound
mode indicator lights up.)
Store your own sound settings
1 Press EQ repeatedly to select [User].
2 Press MENU to display the top menu screen.
3 Turn the volume knob to select [Settings], then press the knob to display the
setting menu.
4 Check that [ ] ([Settings/Audio]) is selected, then press the knob.
5 Turn the volume knob to select the item to set ([Bass]/[Treble]), then press
the knob.
6 Turn the volume knob to adjust the value, then press .
7 Repeat steps 5 and 6 to adjust the value for other settings.
8 Press to exit.
The setting is stored to [User] in EQ.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press .
Activate the bass boost
Press BASS BOOST. (BASS indicator lights up.)
• To cancel, press the button again.
Only for KD-AV41BT:
You can also activate/deactivate the bass boost on the [Settings/Audio] menu.
1 Press MENU to display the top menu screen.
2 Turn the volume knob to select [Settings], then press the knob to display the
setting menu.
3 Check that [ ] ([Settings/Audio]) is selected, then press the knob.
4 Turn the volume knob to select [Bass Boost], then press the knob.
5 Turn the volume knob to select [ON] (to activate) or [OFF] (to deactivate),
then press .
6 Press to exit.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press .
Change the display brightness (Dimmer)
Press and hold DIMMER repeatedly to select [Dimmer Low] or [Dimmer High].
[Settings/Audio] menu
Only for KD-AV31. For KD-AV41BT, operate on the
[Settings/Audio]
menu, or from the remote control (RM-RK259).
Continued on the next page
ENGLISH
KD-AV41BTK.indb13KD-AV41BTK.indb13 2015/11/2713:112015/11/2713:11