Instruction Manual

UR2022 / English Instruction Manual

SETUP

Press in standby mode the “INFO/MENU” button to enter into the setup mode, the display

shows “System”. Press the “TUNER/SELECT/SNOOZE” knob to confirm the selection. To leave

the setup menu, press the “INFO/MENU” button or wait for about 10 seconds.

Time and date settings

The clock will automatically set itself using your digital or FM radio signal. If the time or date

does not update automatically, you can manually set it using this option.

Note: Any time or date updates received by a digital broadcast will override manual settings.

Setting the time and date manually

1. Press and hold the “INFO/MENU” button for 2 seconds to view the main menu.

2. Turn and press the „TUNER/SELECT/SNOOZE“ knob to select „System „ > „Time“.

3. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose „Set Time/Date“.

4. Turn and press the „TUNER/SELECT/SNOOZE“ knob to set the hour. Repeat to adjust the

minutes.

5. Turn and press the „TUNER/SELECT/SNOOZE“ knob ” to set the day of the month. Repeat

to set the month and year.

Note: If you have set your use the 12 hour time format, make sure that you select the

„AM“ or „PM“ version of the hour before pressing the „TUNER/SELECT/SNOOZE“ knob.

Time and date synchronization options

You can synchronize the time and date on using either the FM or digital radio signal.

To specify the clock synchronization options:

1. Press and hold the Menu button for 2 seconds to view the main menu.

2. Turn and press the „TUNER/SELECT/SNOOZE“ knob ” dial to select „System „ >

„Time/Date“.

3. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose „Auto update“.

4. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose between the „update from

Any“, „update from DAB“, „update from FM“ and „No Update“ clock synchronization options.

Changing the time format

1. Press and hold the “INFO/MENU” button for 2 seconds to view the main menu.

2. Turn and press the „TUNER/SELECT/SNOOZE“ knob to select „System “ > „Time/Date“.

3. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose „Set 12/24 hour“.

4. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose between „12“ or „24“ hours.

Changing the date format

1. Press and hold the “INFO/MENU” button for 2 seconds to view the main menu.

2. Turn and press the „TUNER/SELECT/SNOOZE“ knob dial to select „System settings“ >

„Time/Date“.

3. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose „Set date format“.

4. Turn and press the „TUNER/SELECT/SNOOZE“ knob to choose between „DD-MM-

YYYY“ and „MM-DD-YYYY“.