Operation Manual

E-9
LINE OUT CONNECTION
YOU CAN CONNECT THE SYSTEM TO YOUR WHOLE HI-FI SYSTEM BY CONNECTING THE LINE OUT SOCKET
(35) TO THE AUXILIARY INPUT SOCKET WITH A RCA CABLE (NOT PROVIDED).
MORE FEATURES
A. SLEEP SETTING (BY REMOTE CONTROL)
1. PRESS “SLEEP” BUTTON AND SLEEP INDICATOR “ “ WILL SHOWN ON THE LCD DISPLAY (2).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 75 >60….15
MINUTES.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4. TO CANCEL THE SLEEP MODE, PRESS “ SLEEP
” BUTTON UNIT IT REACHS “OFF” MODE.
REMARK:-
IF PRESS THE SLEEP BUTTON ONCE AND THE SLEEP INDICATOR “ “ APPEAR ON THE LCD DISPLAY (2),
THE SYSTEM WILL GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED MINUTES.
B. ALARM CLOCK SETTING (BY REMOTE CONTROL)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY CD, TUNER,
USB OR SD MODE RESPECTIVELY.
FIRST, SET THE UNIT AT STANDBY MODE AND THEN PRESS & HOLD THE “ TIMER ” BUTTON TO ENTER THE
SETTING MODE, THE LCD DISPLAY WILL SHOW SET TIME
– SELECT SOURCE :-
1) WAKE UP SOURCE : PRESS THE “ FUNCTION “ BUTTON TO SELECT THE SOURCE FORM “ TUNER FM “ –
“ TUNER MW “ - “ USB
” - “ SD ” – CD REPEATLY. PRESS “ TIMER “ BUTTON
AGAIN AFTER SELECTED THE SOURCE.
2) WAKE UP TIME : PRESS
SKIP UP / DOWN “ BUTTON TO SET THE HOUR & MINUTES AND
PRESS “ TIMER “ BUTTON “ TO STORE THE MEMORY.
REMARK
¾ THE UNIT WILL SWITCH OFF AUTOMATICALLY AFTER SETTING THE ALARM. THE WAKE UP VOLUME IS
PRESET AT LEVEL 20.
¾ IF THERE IS NO MUSIC SOURCE BEING DETECTED (SUCH AS USB/SD/CD)
WHEN THE PRESET TIME IS
REACHED, SYSTEM WILL DEFAULT TO TUNER MODE AUTOMATICALLY.
¾ FOR TUNER WAKE UP, THE SYSTEM WILL PRESET AT THE LATEST RADIO FRQUENCY BEING LISTENED
BEFORE SWITCHING OFF.
¾ PLEASE SWITCH OFF THE SYSTEM MANUALLY DURING ALARM WAKE UP MODE AS THE
SYSTEM WILL
NOT TURN OFF AUTOMATICALLY AFTER ALARM ON MODE.
z ACTIVE/DE-ACTIVE TIMER FUNCTION
1. TO ACTIVE THE ALARM, PRESS ONCE THE “ TIMER ” BUTTON ON REMOTE HANDSET UNTIL THE TIMER
INDICATOR “
” IS SHOWN ON LCD DISPLAY (2).
2. TO CANCEL ALARM FUNCTION BY PRESS ONCE AGAIN “ TIMER ” BUTTON UNTIL THE TIMER INDICATOR
“
” DISAPPEAR.
C. PRE-SET EQ FUNCTION (BY REMOTE CONTROL)
THIS UNIT PROVIDES 4 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU
CAN SELECT THE DESIRED EFFECT BY PRESSING THE “ PRESET EQ” BUTTON REPEATEDLY AT
FOLLOWING SEQUENCE:-
FLAT CLASSIC ROCK POP JAZZ
D. DISPLAY FUNCTION (BY REMOTE HANDSET)
PRESS TO INDICATE THE CURRENT TIME WHEN THE SYSTEMS IS OPERATING BY ANY MODE OF ALL
FUNCTIONS.