User’s Guide 15" LCD TV Manual del Usuario Televisor 15 LCD Guide d’utilisation Télévision 15 LCD P1500LTD 1 P1500LTD IB(ENG) 0211-12167-20.
Introduction Contents Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble-free service. You may already be familiar with using a similar product, but please take time to read these instructions - they have been written to ensure you get the very best from your purchase. Introduction.............................................................................................................2 Safety is Important...................................
Safety Precautions Getting Started PLEASE READ ALL THE SAFETY INFORMATION BEFORE USE. Carefully remove the LCD TV and all other items from the box. You may wish to store the packaging for future use. Safety Considerations • Position the power supply lead so that it cannot be walked on or pinched by items placed on or • • • • against it. Do not use the LCD TV in humid or damp conditions. Do not allow the LCD TV to get wet. Do not expose the LCD TV to splashing or dripping.
Location of Controls Location of Controls Location of Controls Rear View Front View 1. Input button 2. Standby button 3. Channel button 4. Speaker 5. Menu button 6. Volume button 7. Remote Sensor Side View 1. Hinge 2. Headphone Socket 3. Stand base 1. VGA Input 6. S-video Input 2. PC Audio Input 7. 75 ohm Antenna Socket 3. Scart connector(AV 1) 8. AC Input 4. Rear Audio(R/L) Input(AV 2) 9. Main Power switch 5. Rear Video Input (AV 2) 6 P1500LTD IB(ENG) 0211-12167-20.
Remote Control Inserting Remote Control Batteries 1. Mute ( ) button On the back of the remote control, Loosen the screw to open the battery compartment cover. 2. Sleep button Insert the two AAA batteries supplied, ensuring that you follow the polarity diagram inside the battery compartment. Screw the battery compartment cover on the battery compartment. 3. Input button 4. Pref button 5. Swap button 6. 15 2 16 3 Audio button 8. Menu button 5 ) button 10. DTV Menu button 11.
Remote Control Operation Remote Control Operation Channel Up and Down buttons Press the “ ” button to select TV higher or lower channel. 0~9 Numeric Buttons To select a TV station using numeric buttons 0~9. For example: Press number “9” button to select Channel “9”. Sleep Button • Prees the “SLEEP” button to select a predetermined time the TV will turn off. The sleep time can be set to count down from 15 to 240 minutes.
Remote Control Operation (Digital) Info button(Info/Display Button) • Shows information for the current channel. Switching on the unit Mains Power Guide button • Launches the EPG(Electronic Program Guide) Audio button • Shows the list of audio languages available for the current channel. Exit button • Exists from the menu or sub-menu and cancels the function in progress. DTV Menu button • Shows the menu or sub-menu and cancels the function in progress.
First-Time Installation (Digital) Once you have correctly connected the TV, you will also need to perform a “First-time installation”. The “ENTER” button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, more than one value often has to be entered in a menu. Firstly, make all necessary setting changes. Then, confirm them all simultaneously by pressing the “ENTER” Button.
General Viewing Function (Digital) General Viewing Function (Digital) Channel List Extended Program Information To obtain more information about present and following events, you can press twice “INFO/DISPLAY” button. Like previously, the following event is displayed by pressing the “LEFT/RIGHT” buttons (toggle between present and following events): The Channel selector is activated by a press on the “ENTER/CH-LIST” button while in viewing mode.
General Viewing Function (Digital) Settings (Digital) Subtitle From everywhere, a press on the “DTV MENU” button displays the main menu: Screen 12 : Main menu screen The subtitle display setting in (page20,user setting) allows the end-user to enable or disable subtitling. The subtitles is DVB-Subtitle (coming from DVB-Subtitle tracks). From this menu, a few main categories of settings are available such as management of configuration of TV Channel installation.
Settings (Digital) Settings (Digital) Screen 17 : Full scan channel installation User Setting The screen allow you to select the Menu Language, Audio Language, Subtitle Language, Subtitle ON/OFF, Opacity Level. Screen 18 : User Settings Factory settings This acknowledge pop-up allows you to erase all the custom parameters.
Settings (Digital) Settings(Analog) Parental Control The parental control item allows you to enable or disable the locking management. Screen 22 : Parental control screen Press “INPUT” button to select ATV. Tuning Automatic Tuning • Press the “MENU” button and press the “ ” button to select the TUNE, then press the “ ” button to enter to the Menu. • Press the “ ” button to select Auto Install. • Press the “ ” button to commence the Auto Install.
• • • • • • • Press the “ ” button to select Manual Install, then press the “ to Manual Install menu. Press the “ ” button to select Band. ” button to enter then press the “ ” button to select VHF-L,VHF-H,UHF. Press the “ ” button to select Manual Search, then press the “ ” button to start the Channel search. The search process will be shown on the screen. When a station is found, the search will stop and the station will be displayed and stored under the selected Program number.
Picture Menu In the picture menu, you can adjust the following parameters to your own preference. PC Adjust Menu To adjust the Setting: 1. Press “MENU” button and press the “ the “ ” button to enter to the menu. Brightness Contrast Colour ” button to select the PC ADJUST, then press 2. Press “ ” button to select desire item you want to adjust. Sharpness To change any of these: • Press the “MENU” button and press the “ ” button to select the PICTURE, then press • the “ ” button to enter to the menu.
Trouble Shooting Technical Specification Power Supply Power Consumption Remote Control Batteries Screen size Your television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. There is no picture or sound, or the TV doesn’t turn on. • • • • • Make sure the TV is plugged in. Make sure the MUTE is not set. Make sure the POWER is on.(main power switch located at rear cabinet) Make sure a headphone is not inserted.
