Instructions

NR917 / English Instruction Manual
3
AC OPERATION
Use only the supplied power adapter!
This old fashion TURNTABLE AM/FM CASSETTE CD/MP3 PLAYER operates with
AC230V~50Hz line power. Ensure that the voltage is the same as that indicated on the AC-
adapter label.
Insert the DC plug of the AC-adapter in the AC-adapter jack on the back of the unit, and plug the
AC adaptor into a wall outlet with AC power supply.
Automatic standby
As a power-saving feature, the unit will automatically switch to standby mode if you do not press
any button within 15 minutes after playback is stopped.
RADIO
CAUTION! Do not connect the FM wire antenna to any external antenna!
TIPS FOR GOOD RADIO RECEPTION
1. To ensure maximum FM tuner sensitivity, the FM wire antenna should be fully extended to
obtain the best possible reception.
2. To ensure best AM sensitivity, try repositioning the unit until the best reception is obtained.
RADIO OPERATION
1. Turn the VOLUME CONTROL clockwise until a “click” is heard, the LED indicator lights up
in the Radio Dial Lens.
2. Set the FUNCTION SWITCH to the "AM” or “FM” position.
3. Turn the TUNING CONTROL to select the desired radio station.
4. When you are listening to the stereo program, the color of the LED indicator changes.
5. Adjust the VOLUME CONTROL to obtain the desired sound level.
6. To turn the radio off, turn the VOLUME CONTROL counter-clockwise until a click is heard.
CD
CD/MP3 DISC PLAYER
1. Set the FUNCTION SWITCH to the CD position.
2. Press the button. The display shows ”OPEN”.
3. Put the disc into the CD tray, with the label side facing up.
4. Then press the button again. The CD tray closes automatically. The display shows
“LOAD” .
5. After the disc is read, the display shows the total number of tracks. If the display shows “ ”,
it means that the disc cannot be read, or no disc is inserted.
6. Press the button to start playback from the first track to the last track. The display shows
the current playing track number. The playback stops automatically when all the tracks in
the disc are played. Then the display shows the total number of tracks again.
7. During playback, press the button to pause the playback, and press the button again
to resume playback.
8. For MP3-CD, if there are several foldesr in the disc, the display shows the current folder and
file number alternatively. For example, if it is the second folder and the fifth file, the display
shows and alternately in every three seconds.
9. To stop playback, press the button. The display shows the total number of tracks in the
disc.