Operation Manual

IR43DAB / English Manual
33
5.7.3 Settings
Scan settings /Choose FM at first, it will go to a specific station playing. Then press “Menu” on
the product to get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select Yes after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in
mono only and then YES.
5.8 Bluetooth
When you select the Bluetooth mode, the device is entering to pairing and the BT icon at the
bottom of the screen will flash. Turn on your smartphone, tablet or other Bluetooth devices to
search for the device. The Bluetooth pairing name is “IR43 DAB”.
When pairing is successful, the Bluetooth indicator will light up and stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or other Bluetooth devices.