Operation Manual

IR43DAB / English Manual
30
o If reception was not good for the original scan, this may
result in an empty or incomplete list of available stations.
o If you have poor reception of some stations (burbling), you
may wish to list only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press to select. Once selected, the
station plays and the screen shows information about station, track or show as
broadcast.
5.6.2 Presets
To store an DAB radio preset, press and hold on the remote control until the display shows
the Save preset screen. Select one of the 10 presets to save the current station.
To select a preset, press on the remote control briefly, then select one of the listed preset
stations. The screen will show n ( 1, 2 etc) at the bottom right.
You can store/recall up to 10 of your favourite stations to the memory. This will enable you to