Operation Manual

IR43DAB / English Manual

5.2.3 Network

 Network wizard

Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip WPS to

connect to the wireless network.

 PBC Wlan setup

Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected Setup).

 View settings

View the information of current connected network: Active connection, MAC address, Wlan

region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and Secondary

DNS.

 Wlan region

Select the Wlan region to obtain the optimal Wlan connectivity: Canada, Spain, France, Japan,

Singapore, Australia, and Republic of Korea.

 Manual settings

Choose wired or wireless network connection and enable or disable DHCP (Dynamic Host

Configuration Protocol).

 Network profile

IR43DAB remembers the last four wireless networks it has connected to, and automatically

tries to connect to whichever one of them it can find.

From here you can see the list of registered networks. You can delete unwanted networks by

turning and pressing then choosing YES to confirm delete.

 Keep network connected