Operation Manual

14. After all setting, the SPEAKER CONTROL screen will appear as following figure.
SPEAKER CONTROLS
No song
Play All

Tap " " to add more speaker to the
network, repeat the procedures above
stated and make connection as on
screen instructions.

Tap " " to rename the speaker,
check the speaker info or reset to the
factory setting, check the preset content.

Tap " STEREO" to change audio mode
to L(left channel), R(right channel) and
LR(stereo).
15. If more than one speaker has been added into
“ ”
R
You Belong with me
Bedroom
....................................................
R
Bathroom
R
Bathroom
Because of you
....................................................
R
You Belong with me
Bedroom
Multi Mode: Press and hold device icon and
drag towards another device to pair devices.
Solo Mode: Press and hold device icon and
drag down past dotted line.
mode as the figure on right.
the device will be added to
the SPEAKER CONTROLS LIST.
the DEVICE LIST, you can tap the
instruction
to learn how to switch
solo and multi
If there is another
device is on same
network,
<
DEVICE LIST
LR
LR
...............................................
How to switch between solo and multi mode?
No song
Play All
Add a New Speaker
CAW-37052_XXXX
STEREO

Tap " " to update the list.
CAW-37052_XXXX
CAW-37052_ABCD
11