MS2A MARINE AUDIO SYSTEM Installation and Operation Manual
MS2A CONTENTS Important Safety Instructions ................................................................................. 1 Introduction ............................................................................................................ 2 Installation .............................................................................................................. 4 Wiring.....................................................................................................................
MS2A WARNINGS AND COMPLIANCE WARNING! To reduce the risk of fire of electric shock, do not expose this apparatus to rain or moisture. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
MS2A INTRODUCTION System Features HARDWARE KIT CONTENTS Features of the Jensen MS2A marine audio system include: • White LED Backlit LCD • iPX5 Waterproof (after installation) • Low Battery Alarm • AM/FM US/EURO Tuner with 30 Presets (12 AM, 18 FM) • Bluetooth (Supports A2DP and AVRCP) • USB Playback of MP3/WMA files with iPod/iPhone Interface • Mute • Pre-set Equalizer - 5 settings (USER > FLAT > POP > CLASSIC > ROCK) • Electronic Bass, Treble, Balance and Fader Controls • Output Power 40W x 4 • Wired R
MS2A SAFETY INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. When Boating Keep the volume level low enough to be aware of your surroundings. Protect from Water Do not submerge the product in water, as this can cause electric shorts, fire or other damage. Protect from the Elements Use the included cover to protect the wired commander from sunlight, dust, and water while not in use.
MS2A INSTALLATION 2. Before You Begin Before you begin, always disconnect the negative battery terminal. 3. Important Notes • • • • • Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel.
MS2A WIRING POWER SOCKET SHOWN FROM PIN VIEW 5 PIN DESCRIPTION WIRE COLOR A1 RIGHT REAR SPEAKERS (+) PURPLE A2 RIGHT FRONT SPEAKERS (+) GRAY A3 LEFT FRONT SPEAKERS (+) WHITE A4 LEFT REAR SPEAKERS (+) GREEN A5 LEFT REAR SPEAKERS (-) GREEN/BLACK A6 LEFT FRONT SPEAKERS (-) WHITE/BLACK A7 RIGHT FRONT SPEAKERS (-) GRAY/BLACK A8 RIGHT REAR SPEAKERS (-) PURPLE/BLACK B1 NO CONNECTION EMPTY B2 NO CONNECTION EMPTY B3 AMP REMOTE (+12VDC 100mA) BLUE B4 NO CONNECTION EMPTY B5
MS2A BASIC OPERATION Audio Menu Press the AUDIO/MENU button (3) on the control panel to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO/MENU button repeatedly. Once the desired menu item appears on the display, adjust that option by pressing the VOL+ UP or DOWN VOL- buttons (2) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The following menu items can be adjusted.
MS2A • • • • • • BATT audible tone. LCD BRIT (01 – 10): Adjust LCD brightness. BT ON/OFF: Choose “BT ON” or “BT OFF”. BT PAIR (ON/OFF): Choose “YES” to automatically pair a previously paired device. BT DEVICE (Lock/Unlock, Disconnect/Connect, Delete): View, lock and delete from a list of previously paired mobile phone device models. RESET: Return the EEPROM to factory default set up values. "RESET" will blink on the LCD to confirm. Press the ENTER button (18) to select. 2. 3.
MS2A TUNER OPERATION Automatically Store / Preset Scan (AS/PS ) Automatically Store Select a band (if needed). Press and hold the AS/PS button (15) for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. NOTE: During Auto Store (AS), the tuner will default to “Local” mode while scanning the band initially.
MS2A MP3/USB OPERATION Controlling Playback Pause/Play Press the 1/|| button (5) to suspend playback. Press the 1/|| button again to resume playback. Track Select Press the ►►| SEEK/TUNE/TRK or |◄◄ SEEK/TUNE/TRK buttons (14, 13) button for less than one second to advance to the next file, or press and hold to fast forward or fast reverse. Playback begins when the button is released. Repeat (RPT) Press the 2/RPT button (6) to repeatedly play the current file.
MS2A iPOD® OPERATION Turning the iPod On/Off This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel buttons. The following iPod versions are supported: • iPod Nano – 6G, 7G • iPod Classic • iPod Touch – 4G, 5G • iPhone – 4, 4S, 5, 5C, 5S The iPod power turns on automatically when an iPod is connected to the USB connector, as long as the vehicle ignition is turned on.
MS2A Alternate Display Information Press the DISP button (12) to change the display information in the following order: ARTIST >TITLE > FOLDER > FILE NAME > ARTIST. Search Mode Press and hold the BAND/SEARCH button (16) to enter iPod search mode and choose from the following search criteria: Playlist, Artist, Album, Song, Genre or Composer (consecutively). When search mode is selected, press the ENTER button (18) to confirm selection.
MS2A BLUETOOTH OPERATION The MS2A includes built-in Bluetooth technology that allows you to wirelessly connect Bluetooth devices to this head unit for streaming audio playback. BT Device Press Enter Use VOL+ UP or DOWN VOL- to Navigate the List Device 1 Device 2 Device 3 Device 4 Device 5 About Bluetooth Technology Bluetooth is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
MS2A APP OPERATION Receiving a Call While Listening to Music When answering a call using a connected phone, BT AUDIO will pause. After hanging up from the call, BT AUDIO will continue on some phones. It may be necessary to press the play button to resume BT AUDIO. JENSEN® Specialty Controller is the ultimate wireless remote control for your JENSEN stereo system.
MS2A CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
MS2A SPECIFICATIONS FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 108 MHz Sensitivity (S/N = 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>45 dB Stereo Separation . . . . . . . . . . . . . .
ASA Electronics Corporation www.asaelectronics.com www.jensenmarinedirect.com © 2015 ASA Electronics Corporation v.
