User's Manual

-34-
the relative time to the current time. You can also use arrow keys to set the time.
To register the timer, press the timer button on the remote controller and use up/down arrow
button to select MODE/TIME/Hour/Minute, or use Left/Right arrow button to adjust the value of
each item. Then, press the timer button again. The remote input signal indicator changes as
shown below in order to indicate the time that the ‘SLEEP/ALARM’ function will start.
Timer Function On
Timer Function On and All Time Control Mode enabled.
To cancel the timer, press the timer button and select the NONE mode. Then, press the timer
button again.
7. Using Virtual Keyboard
iMON Manager includes the Virtual Keyboard function in order to help you type the alphabet on
your application. Basically, the character input method is similar in manner to use the mobile
phone dial pad. In order to input the alphabet character that you want, please locate the cursor
on the text input field and execute the “Application Launcher”. And select the “iMON Virtual
Keyboard” on the “Application Launcher”.
There are five different input character sets are pre-defined on the iMON Virtual Keyboard for
your typing. These are ①English Capital letters, ②English Small letters, ③Numbers, ④Special
letters and ⑤words for web surfing. You may input the character as shown on the Virtual
Keyboard using these buttons on the iMON remote controller.