User's Manual

Here, we will explain how to register other remote controllers than iMON RC. Use
the following steps to register your favorite remote controller. Now, choose your own
remote controller and register it.
Click Add Remote Controller button to bring up a window as shown below.
Enter the new remote controller name and select Scan function and whether to
register the iMON RC signal. Check the automatic registration check box to use the scan
function that iMON Manager scans for supported applications in your PC and register the
corresponding functions automatically. Check iMON RC signal registration check box
only when you have purchased the iMON RC, which sets the IR signal values for
iMON RC. If you have not registered signals for iMON RC, it only retrieves the shortcut
values for programs. Therefore, you need to set the IR signal value for the remote
controller separately using your registered remote controller.
Click ‘OK’ button. You will see the remote controller is registered as shown in the figure
below.
Likely, you can register several additional remote controllers.