User Manual

Soundcraft Si Expression User Guide V1.0 0213

Input Patch: Displays the source patched to the channel; see PATCHING for details

of the system patching functionality.

Direct Out Patch: Displays the destination patch of the channel direct out function; see

PATCHING for details of the system patching functionality.

Channel Sends Post-Pre:

It is possible to over-ride the pre/post fade settings imposed by the

bus masters on a per channel basis; click using the scroll/adjust

encoder to open the dialogue options of Cancel, All Post or All Pre.

Selecting All Post or All Pre will set all mix bus sends of the SELected

channel pre or post the channel fader. To ip the status of an individual

channel send to each bus pre or post scroll down the list of mixes

and use the scroll/adjust encoder to ip the channel send pre/post

as required.

NOTE: Channel pre/post settings are stored per cue, a cue will need to be stored or

updated to make any change permanent.