User's Manual

07 English English 08
Slow flashing white (Right
earbud only)
Incoming call
Tap the multifunction touchpad on the
left earbud twice
Activate Siri / Other
voice control software
Reset
1
2
4
3
Soundcore
Liberty Air
7”
7”
How to reset the earbuds if you can only hear sound on one side:
1. Delete “Soundcore Liberty Air” from your device’s Bluetooth
list, and turn off the Bluetooth on your device.
2. Place one earbud in the charging case and make sure it’s
charging. The LED indicator will be solid white.
3.
Tap and hold the multifunction touchpad of the earbud
(currently in the charging case) for 7 seconds until the LED
indicator flashes red 3 times. This clears the pairing information.
4. Put the other earbud in the charging case and repeat step 3.
5. After the pairing information is cleared, take both earbuds
out of the charging case and place them next to each other. If
TWS pairing is successful the LED indicator on the left earbud
will start flashing slowly and the LED indicator on the right
earbud will flash rapidly.
6. Turn on Bluetooth on your device and search for “Soundcore
Liberty Air” to connect.
Specifications
Specifications are subject to change without notice.
Input 5 V 0.5 A
Charging time 2 hours
Playtime (varies by volume level and
content)
7 hours
Weight (product net weight) 55 g / 1.9 oz
Impedance
16 Ω
Driver (full range) 6 mm × 2
Frequency response 20 Hz - 20 KHz
Bluetooth version V 5.0
Range 10 m / 33 ft