User Manual

32 5
1
1
Set up the Transmitter and Receiver
Transmitterwith an AV Receiver/Surround Processor, or 2 Channels Pre-Amp have a
line level subwoofer output labeled Subwoofer Pre Out, Sub Out, SW Out..etc
Application 1: WSA-5TR with an 5.1/7.1 AV Receiver or Surround Processor
Step 1 - Use the supplied (d) RCA cable to connect the Subwoofer Pre-Out or LFE
output of your AV receiver and to the (a) WSA-5TR wireless transmitter Audio Input.
You can leave right RCA plug unconnected if you are connecting to a subwoofer as
mono signal
Step 2 - Plug supplied (e) USB A to Micro B cable into “POWER” on the (a) WRA-5TR
transmitter, and plug other end into the (c) 5V 1A power supply, and plug into an120V
AC outlet
Step 1 - Use the supplied (d) RCA cable to connector the 2 channel stereo pre-
amplifiers L/R line level Pre-Outs to (a) WSA-5TR wireless transmitter L/R input
*Leave right RCA plug unconnected if you have a mono source
Step 2 - Plug supplied (e) USB A to Micro B cable into “POWER” on the (a) WRA-5TR
Application 2: WSA-5TR Wireless Transmitter with a 2 Channel Stereo Pre-Amplifier:
-2-