User's Manual

BATTERY INSERTION
POWER & VOLUME CONTROL
The ITC hearing aid is powered by a type 312 battery. We
recommend using a zinc-air type battery for the best
performance. To insert a zinc-air type battery, remove the
adhesive label and wait thirty seconds for air to activate the
battery. Wipe any moisture off the battery surface. Open the
battery door and with the positive side up, insert battery into
the battery door.
To remove, open the battery door and lift the battery out of
the battery door.
On Position OFF Position
When your battery is low and needs replaced you will hear the
low battery voice prompt. The prompt will be repeated until
the battery is changed. The low battery voice prompt will be
repeated every 15 - 20 minutes.
After inserting the battery, close the door completely to turn
the unit on. To turn the unit off, simply open the battery door
partially. To help prolong battery life, open the battery door
each time you remove your hearing aids.
Once the battery door is completely shut, you will hear the
unit turn on. The In-The-Canal (ITC) models feature
automatic volume control. The overall volume can be
adjusted in the Lucid App.