Manual 3BDL 1BDL 8 10 &3 "% / : . & */ &3.
Manual RackPack, Model 2710 Version 1.0 – 8 /2007 Designer: Wolfgang Neumann This user’s guide contains a description of the product. It in no way represents a guarantee of particular characteristics or results of use. The information in this document has been carefully compiled and verified and, unless otherwise stated or agreed upon, correctly describes the product at the time of packaging with this document.
Contents Important Safety Information ................................................................ 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hook Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Information Please note and retain this information. Carefully read and follow all of the safety and operating instructions before you use the machine. Be doubly careful to follow all warnings and special safety instructions noted in this manual and on the unit. This manual provides all information needed to fit or exchange RackPack modules. Module manuals do not contain information on fitting and exchanging modules. You need this manual everytime a module is to be fitted or exchanged.
Important Safety Information Repairs: Unplug the machine and immediately contact a qualified technician when you think repairs are needed – or when moisture or foreign objects may accidentally have gotten in to the housing, or in cases when the machine may have fallen and shows any sign of having been damaged. This also applies to any situation in which the machine has not been subjected to any of these unusual circumstances but still is not functioning normally or its performance is substantially altered.
Introduction RackPack The RackPack system allows you to set up a very compact, customized analog rack on only 3 U rack space – equipped with both approved and new SPL specialties providing you one-ofa-kind processing, highly effective handling and superior audio quality. RackPack Modules The Transient Designer opens a new dimension in dynamic processing with its unique level-independent signal processing.
Hook Up Scope Of Delivery • The RackPack frame including all blind panels and the front panel (if modules are not fitted already). Please note that all modules are shipped without the aluminum front panel. You need it when you fit a module into the frame. Therefore make sure that you handle the aluminum front panels with the same care and prudence as any other unit surface. All screws holding front and rear blind and front panels are needed for the fitting of modules.
Hook Up Air Circulation Always ensure sufficient air circulation in any installation or setup: always keep a distance of about 4-5 cm (1 U rack space or about 2 inches) to the next device. This concerns especially the space above and below the device because louvers are cut into top and bottom panels for optimal heat removal. For free placement outside of a rack please always use a level and stable surface. Never place it on a soft surface such as a blanket or a cushion etc.
'PS *OTUBMM BOE 3FNPWBM PG 3BDL1BDL .PEVMFT 1MFBTF SFGFS UP .BOVBM GPS EFUBJMT )PU 1JO ° $PME 'PS PUIFS DPOOFDUPST QMFBTF SFGFS UP .
Fitting Modules Step 1 Please Note Fitting and/or exchanging modules should only be done by qualified persons. In the light of possible physical damage or injuries any manipulation is at your own risk. SPL is not liable for any physical damage or injury. Before opening the device please read all security advices (pages 4 and 5) and the “Hook Up” information (pages 7 and 8).
Fitting Modules Step 2 and 3 Step 2 (Rear View) 'PS *OTUBMM BOE 3FNPWBM PG 3BDL1BDL .PEVMFT 1MFBTF SFGFS UP .BOVBM GPS EFUBJMT .BEF JO (FSNBOZ 16 65 5 06 5 16 16 / * / 65 65 $0//&$503 8*3*/( 9-3 1JO (/% 1JO 5 4&3*"- /6.
Fitting Modules Step 4 and 5 Step 4 (Top View) Y .0%6-& 'MBU SJCCPO DBCMF XJUI FJHIU QMVHT UP QPXFS UIF NPEVMFT "8":4 16-- 03 13&44 5)& 1-6(4 /&7&3 5)& $"#-& .0%6-& TJMWFS EFDPSBUJPO QBOFM Y Insert the new module into the slot from the front side of the RackPack.
Fitting Modules Link Cable Installation Link Cable Installation (Top View) 'MBU SJCCPO DBCMF XJUI UXP QMVHT UP DPOOFDU UXP NPEVMFT GPS -*/, NPEF .0%6-& .0%6-& .0%6-& .0%6-& 'MBU SJCCPO DBCMF XJUI FJHIU QMVHT UP QPXFS UIF NPEVMFT Two modules supporting the LINK feature (i. e. Transient Designer & DynaMaxx) can be run as stereo pairs. In LINK mode, the master module controls the slave module and allows a coherent processing of stereo programs over both channels.
External Power Supply The external power supply offers fundamental advantages over internal power supplies: Properly installed, transformer hum and interference should never be an issue and the unit should deliver clean, clear audio. In addition to that, internal circuitry is free from AC power which could negatively influence especially sensitive modules such as preamps. The 100 VA transformer is generously proportioned to ensure plenty of power in any situation and proper current for the various circuits.
Dimensions & Weight Width x Height x Depth Weight (without modules) 482 x 132 x 296 mm/19 x 5.19 x 11.65 in 5,65 kg/12.46 lbs External Power Supply – Dimensions External Power Supply – Weight 154 x 67 x 236 mm/6.06 x 2.63 x 9.29 in 4,25 kg /9.37 lbs Guarantee All SPL products come with a two-year manufacturer’s guarantee against defects in material or assembly from the date of purchase. End users are supported in the two-year guarantee through their distributor or dealer.
< Manual RackPack Model 2710 RackPack
