User Manual

Scorpio Preliminary User Guide
6
REAR SIDE PANEL
10-18 V DC 2 TA4 Jack
Battery 1, Battery 2 Docking Dante /Ethernet RJ-45 Jacks
10-18V DC2 TA4 JACK Accepts DC voltages from 10–18 V for
powering. [Pin1- GND, Pin2- Smart Battery DATA, Pin3- Smart Battery
CLOCK, Pin4- +10-18 VDC]
BATTERY 1, BATTERY 2 DOCKING Sony L-Mount type batteries
may be used. When connected to an external DC source via DC1 or
DC2 the L-Mount batteries can be charged if enabled in the Power
menu.
DANTE RJ45 JACKS Two-1 GbE ports serving as a Dante audio
network connections. The Dante interface provides 32 inputs and
32 outputs simultaneously. Routing is dened through the Channel
Source and Output menus. Dante Controller app on Mac/PC (from
Audinate) needed to route and use Dante.
TOP PANEL
Expansion connector for SL-6
Test connector for manufacturing
EXPANSION CONNECTOR FOR SL-6 Connection for Sound
Devices SL-6 modular wireless receiver system. Routing is dened
through the Channel Source menu.
TEST CONNECTOR Used during manufacturing.