User Manual

Scorpio Preliminary User Guide
20
System
TONE SETUP Selects the level, frequency, and routing of the
internal tone generator.
a. Level- Selects the level of the tone generator from -20 - 0 dBFS in 1
dB increments. [-20 - 0 dBFS]
b. Frequency- Selects the frequency of the tone from 100 to 10 kHz in
10 Hz steps. [100-10 kHz]
c. Track- [1-32]
d. Output- [L,R, X1-X10]
e. Bus- [L,R, 1-10] [L-ident]
NOTIFICATION BELLS Selects settings for the notication bells.
a. To HP- Routes notication bell tones to the headphones. [HP-L,
HP-R]
b. To Bus- Routes notication bell tones to the buses. [L,R, 1-10]
c. When…- Selects when the notication bell tones are used. [Rec/
Stop, Space Low, Power Low, Warning Popup]
d. Level- Selects the level at which the notication bell tones will be
played in 1 dB increments. [Muted, -60 to -12dBFS]
FADER CALIBRATION Selects the option to manually
calibrate all faders.
BRIGHTNESS Selects the brightness of the LED display and
front panel LEDs.
a. LED Brightness- Selects the front panel LED brightness in 10%
steps. [10%-100%]
b. Selects the front panel LCD display brightness in 10% steps. [10%-
100%]
TIME/DATE Selects the current date and time.
a. Time Format- [12*, 24 hr]
b. Date Format- [mm/dd/yy*, dd/mm/yy, yy/mm/dd]
c. Set Time/Date- Selects the current date and time
d. Time Zone- [-12 to +13 hours GMT]
e. Daylight Saving- [On, Off*]
VERSION INFO Indicates current rmware version
FIRMWARE UPDATE Selects any *.prg update les present on any
media.