Manual

MixPre-D User Guide and Technical Information
11
Front Panel Button Shortcuts
Function Key Sequence Action
HP Source Toggle
Press Headphone Controller.
Switches monitor source between mixer output
(LED off), RTN program (solid blue LED), and
computer output (flashing blue LED).
RTN Level
+
Press and hold Headphone Controller then turn
Headphone Controller.
Adjusts the input level of RTN input.
Limiter Threshold
+ +
Hold Input 1 Button, hold Input 2 Button, and
turn Headphone Controller.
Adjusts the threshold level of the limiter.
Input Linking
+ +
Hold Input 1 Button, hold Input 2 Button, and
slide Slate Switch right.
Switches input linking between unlinked (no LEDs),
stereo linking (one LED lit), and M/S linking (both
LEDs lit).
12V Phantom
+
Slide and hold Slate Switch right and press
Headphone Controller.
Switches between 48V phantom and 12V phantom
(for mic inputs setting only).
LED Brightness
+
Slide and hold Slate Switch to the right and
turn Headphone Controller.
Adjusts brightness of all LEDs
Sample Rate
+
Hold Headphone Controller while switching
Right Output Switch to AES.
Switches between 44.1 kHz, 48 kHz, and 96 kHz
sample rates.
Channel 3 Assign
+
Hold Input 1 Button and press Headphone
Controller.
Switches destination of left channel of RTN input
between RTN left (-30 on meter), left output bus
(-18), center output bus (-16), and right output
bus(-14).
Channel 4 Assign
+
Hold Input 2 Button and press Headphone
Controller.
Switches destination of right channel of RTN input
between RTN right (-30 on meter), left output bus
(-18), center output bus (-16), and right output bus
(-14).
Channel 3 Level
+
Hold Input 1 Button and turn Headphone
Controller.
Adjusts input level of input 3 (when set to some-
thing other than RTN left).
Channel 4 Level
+
Hold Input 2 Button and turn Headphone
Controller.
Adjusts input level of input 4 (when set to some-
thing other than RTN right).