User Manual

43
RECORDING AND PLAYBACK
To set a cue as a Play In, Record In/Out, or Stop point:
1. From the Cue List, select a cue.
2. Tap Set As.
3. Tap Play In, Record In, Record Out, or Stop to set the selected cue mark as
an In/Out point for recording or playback.
Moving Cue Points
You can nely tune the position of In and Out points in 0.1 second increments.
To move Cue Points:
1. Tap Cue List.
2. Use the HP encoder to select a cue point.
3. Tap Move and rotate the HP encoder to adjust the selection in 0.1 second
increments.
Previewing Cue Point Positions
To aid in ne tuning the position of any cue point, you can preview it. Preview
plays a few seconds from the cue point. If the cue point is slightly late or early,
use the move function to ne tune its position.
To preview Cue Points:
1. Select one in the Cue List and press Play.