User Manual

User Guide
42
Alternatively, you can create cue marks and set them as Play In, Record In/Out,
or Stop points from the Cue-List.
To add cues marks:
X During recording, playback, or pause, tap , the Q icon at the top of
the Home screen to add a cue mark exactly at that point in the song. A
cue mark number (starting from 01 and incrementing each time a new cue
mark is added) is displayed next to the Q icon.
X Alternatively, when stopped, tap , the Q icon at the top of the Home
screen to access the Cue Points menu. Then, tap , the Q button to add a
cue at current song position.
The MixPre automatically renumbers cue marks if one is inserted between
existing cue marks to maintain their ascending numerical order from the start
of the song—01, 02, 03, etc.
Cues appear in numerical order in the Cue List, such as 01 shown in following
image, below the Play In, Record In/Out and Stop points.
You may have up to 99 such cues per song. Cues may be named, moved,
deleted or set as Play In, Record In/Out, or Stop points from the Cue List.
L You cannot rename Playback or Record In/Out points.
To access the Cue List:
X From the Music Control menu.
X From the Cue Points menu.
To custom name a cue mark :
1. Access the Cue List. The Cue List screen appears.
2. Select a cue mark, using the HP encoder.
3. Tap Name and enter a new name, such as Chorus or Bridge.