User Manual
Table Of Contents
17
MODES AND PRESETS
Custom Mode
Custom mode is intended for users who want to customize the features and
functionality available to them. This mode grants access to dierent sections of
Advanced Mode features, turning them on or o in the user interface as desired.
1. Tap .
2. Tap System > Mode, and then select Custom.
3. Tap System > Custom Setup to customize what features you want to
access.
Custom Setup options are:
Pag e Sub-menu Description
1 Channel Lets you access Solo, Track Arm, extended Pan, Input Select,
Phantom, Phase, delay, and Low Cut, which is selectable by
frequency.
1 Gain Lets you access to (two-stage) Channel Gain controls, limiters
and linking.
1 Headphone Lets you access extended headphone source select options
including factory and user headphone presets, preset editing
and Solo setup for Individual/Multiple channels.
1 Record Provides additional record settings for gain, sample rate, bit
depth and LR arming/linking, as well as ISO track arming/
naming.
2 Metadata Adds ability to change track name, rename les, add notes and
undo recordings.
2 Outputs Provides routing and gain settings for the Stereo Out, as well
as Tone mode and level.
User Presets
Flexibility is the MixPre-6’s M.O. To make it easy for you to use the MixPre-6 in
a wide variety of situations, we created a slick feature where you can store and
recall snapshots of all of the MixPre-6’s settings. There are four internal Preset
slots available. Also, the SD card can store virtually unlimited Presets.
Here are three common examples:
• You might want to use the MixPre-6 as recorder, mixer, and USB audio
interface in a podcasting rig with specic microphones.
• The next day, you need to have the MixPre-6 handle audio duties for you
while you’re shooting video on your DSLR camera.
• On Sunday, you might need to use your trusty MixPre-6 to record worship
services, mixing a direct line from the PA with a stereo microphone feed.
Using Presets, you can optimize settings for each of these scenarios and then
simply save each setup to one of four internal preset locations or to the SD