User Manual
45
RECORDING AND PLAYBACK
Clear is only displayed if the track contains audio.
⚠ Clearing tracks removes them from the project entirely. The les still
exist, but they can only be accessed from a computer.
3. Tap Yes to conrm removal of track audio from the project.
Metronome
The metronome is an audible click that may be used to help you perform in
time while recording and also provide a count-in so that you know when to start
playing. The rst beat of the bar is represented by a higher pitched click than
the other beats of the bar. The metronome click is summed with the LR mix and
as such can be heard when the headphones or outputs are set to LR.
The metronome may also be recorded to a track. Select Click in a track’s Input
screen.
To set up the metronome:
1. Tap .
2. Tap Metronome, then do any or all of the following:
L You will hear a preview of the metronome while in this screen.
X Tap Signature and set the beat (time signature) for the song. Options
include: 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 8/4, 6/8, 7/8, 9/8.
X Tap Tempo and set the song tempo (metronome click rate) by tapping
the arrows or using the HP encoder to adjust the tempo bpm (beats per
minute) value. Range is 40 to 240 bpm.
X Tap Volume to set the volume of the metronome click.
X Tap Count-in to set the number of count-in bars you want before
recording starts. Range is 0 to 8 bars.
X Tap On During... to set when the metronome is active. Options include:
Record, Play, or Count-in.
To enable the metronome, do either of the following:
X From the Music Control menu, tap the Metronome button. The