User Manual
41
RECORDING AND PLAYBACK
To access the Cue List:
X Tap Cue List from the Music Control menu.
X Tap Cue List from the Cue Points menu.
To custom name a cue mark :
1. Access the Cue List. The Cue List screen appears.
2. Select a cue mark, using the HP encoder.
3. Tap Name and enter a new name, such as Chorus or Bridge.
To set a cue as a Play In, Record In/Out, or Stop point:
1. From the Cue List, select a cue.
2. Tap Set As.
3. Tap Play In, Record In, Record Out, or Stop to set the selected cue mark as
an In/Out point for recording or playback.
Moving Cue Points
You can î‚¿nely tune the position of In and Out points in 0.1 second increments.
To move Cue Points:
1. Tap Cue List.
2. Use the HP encoder to select a cue point.
3. Tap Move and rotate the HP encoder to adjust the selection in 0.1 second
increments.