User Manual
33
PROJECTS
To create a project based on a non-native poly WAV le:
1. Tap .
2. Tap Project > New > Import Recording.
3. Select your le from the those available on the SD card:
X Use the HP encoder to select a .wav le from the root of the SD card.
X Scroll to and select the an Audio project folder rst, then choose a .wav
le to import it from within the folder.
Opening Projects
When switching from the current project to another project, you do not need to
worry about saving the current one; the MixPre automatically saves the current
project’s state.
To open an existing project:
1. Tap .
2. Tap Project > Open. A list of all projects, identied by a music notes
icon, on the SD card is displayed.
3. Rotate the HP encoder to highlight the chosen project; push in encoder to
open the project.
Once selected, the project is opened and the Home screen is displayed. You
are ready to start recording.
Trashing Projects
Since SD cards are capable of holding many gigabytes of data, the list of
projects can become quite long. You can trash any project apart from the one
that is currently active.
To trash a project:
1. Tap .
2. Tap Project > Trash Project.
3. Select a project to trash.
4. Tap OK to conrm deletion of selected project. This actually moves the
selected project and all its les to the TRASH folder on the SD card. Projects
in this folder are still accessible using a computer.
L To free up space on the SD card, you can permanently delete projects in the SD
card’s TRASH folder from the MixPre-3M’s SD Card > Empty Trash sub-menu.