User Manual

User Guide
32
Creating Projects
MixPre-3M will automatically create a project if record is pressed without rst
creating a new project.
To create a new Music project:
1. Tap .
2. Tap Project > New.
3. When the New Project screen appears, you can do any of the following:
X Name the project.
X Set the sample rate. Options include: 44.1kHz, 48kHz, or 96kHz.
L Be sure to choose the correct sample rate when you create a new project; you
cannot change it once created.
When using the MixPre as a USB audio interface, ensure that you set the computer
OS, DAW application, and the MixPre project to the same sample rate. This
prevents clocking and/or o-speed playback issues.
Reverb is unavailable when sample rate is set at 96kHz.
4. Tap Create when you’re ready to create the new Music project.
L The new project’s name is shown at the top of the Home screen.
For more information, see Project History and Project Folder Structure.
Import Recording
When creating a new project, you may choose to import a .wav audio le (up
to 12 tracks) as the foundation for your project. This is ideal for importing
multitrack audio from a DAW should you want to continue developing your
composition in the MixPre. Or perhaps you’ve created a backing track in your
DAW for a live performance and want to use the MixPre as your all-in-one
playback device and mixer during the show.
L You may also import .wav les from Audio projects recorded using the MixPre-3,
MixPre-6, or MixPre-10T models.