User Manual
27
Outputs
The MixPre-3M has a 3.5mm unbalanced output on its left side panel.
To route the L/R stereo output:
1. Tap .
2. Tap Outputs.
3. Tap Stereo Out to route 3.5mm output.
The stereo outputs can be fed from the LR mix (stereo or mono) or can be
set to follow whatever is being output in the headphones (stereo or mono).
This is useful for providing a secondary headphone output feed.
Adjusting Output Level
Adjust output gains to optimize the level feeding downstream devices, such as
active speakers, external mixers, PA gear, etc.
To adjust output gain:
1. Tap .
2. Tap Outputs.
3. Select St. Out Gain.
You can adjust L/R output gains from +20 to -40dB.
Headphone Output and Presets
The MixPre-3M’s audiophile-grade headphone amplier provides high power
and very low noise performance so that you can accurately hear the audio
being handled, regardless of headphones or environment. Connect headphones
via 3.5mm jack to the headphone jack (located on the right side panel). The
volume of the headphones can be set with the encoder directly adjacent to the