User Manual
User Guide
22
Like Mute, soloing is non-exclusive, meaning any number of inputs may be
soloed at the same time.
You can quickly solo/mute several tracks from the Solo/Mute screen. All 12
tracks’ Solos and Mutes may be viewed and set from this screen.
To solo or mute tracks from the Solo/Mute screen:
1. Tap . The Music Control screen appears.
2. Tap Solo/Mute. The Solo/Mute screen appears.
3. Do either of the following:
X Tap either Solo or Mute and then tap track(s) to select them. Soloed
channels appear orange; muted tracks appear red.
X Use the HP encoder to highlight (green outline) a track and then tap
either Solo or Mute.
4. Tap to exit the screen.
Arming a Track
Armed tracks appear with red numbered boxes on the Home screen’s Meter
view.
To arm/disarm a track:
X From the Channel screen, tap Arm to enable or disable a track for
recording.
Understanding Pan
Pan sets the position of the track in the LR stereo mix.
Pan range has 33 positions from L16 (fully left) to C (Center) to R16 (fully
right).
Using Reverb
Reverb sets how much reverb is added to a track in the LR mix. Only the mix is
aected, not the individual recorded tracks.