User Manual

User Guide

To set a cue as a Play In, Record In/Out, or Stop point:

1. From the Q-List, select a cue.

2. Tap Set As.

3. Tap Play In, Record In, Record Out, or Stop to set the selected cue as an

In/Out point for recording or playback.

Moving Q-Points

You can nely tune the position of In and Out points in 0.1 second increments.

To move Q-points:

1. Tap Q-List.

2. Use the HP encoder to select a Q-point.

3. Tap Move and rotate the HP encoder to adjust the selected Q-point in 0.1

second increments.

Previewing Q-Point Positions

To aid in ne tuning the position of a Q-point, you can preview it. Preview plays

a few seconds from the Q-point. If the Q-point is slightly late or early, use the

move function to ne tune its position.

To preview Q-Points:

1. Select the Q-point in the Q-List and press Play.