User Manual

43
RECORDING AND PLAYBACK
L It is not possible to place an In point after an Out point. It is also not possible to
have more than one In or Out point of each type (Play or Record).
Alternatively, you can create cue marks and set them as Play In, Record In/Out,
or Stop points from the Q-List.
To add cues marks:
X During recording, playback, or pause, tap , the Q icon at the top of the
Home screen to add a Cue Mark exactly at that point in the song. A cue
mark number (starting from Q01 and incrementing each time a new cue
mark is added) is displayed next to the Q icon.
X Alternatively, when stopped, tap , the Q icon at the top of the Home
screen to access the Q-Points menu. Then, tap , the Q button to add a
cue at current song position.
The MixPre automatically renumbers cue marks if one is inserted between
existing cue marks to maintain their ascending numerical order from the start
of the song—Q01, Q02, Q03, etc.
Cues appear in numerical order in the Q-List, such as 01 shown in following
image of the Q-Points screen, below the Play In, Record In/Out and Stop points.
You may have up to 20 such Q-points per song. Cues may be named, moved,
deleted or set as Play In, Record In/Out, or Stop points from the Q-List.
L You cannot rename Playback or Record In/Out points.
To access the Q-List:
X From the Music Control menu.
X From the Q-Points menu.
To custom name a cue mark :
1. Access the Q-List. The Q-Points screen appears.
2. Select a cue mark, using the HP encoder.
3. Tap Name and enter a new name, such as Chorus or Bridge.