User Manual

User Guide
40
To format a USB Thumbdrive:
1. Connect a USB ThumbDrive to the USB-A port located on the left panel.
2. Tap .
3. Tap USB Drive > Edit > Format.
4. When asked to format the card, tap OK.
All USB drive sizes are formatted as exFAT.
L The exFAT le system is not compatible with Windows XP or Mac OS X 10.6.4 and
earlier.
Transport Controls
On the MixPre-10M, the joystick transport control works in a similar fashion
to how transport controls work in a typical DAW, i.e. they control a playback
cursor (typically indicated by a moving vertical line in most DAWs) that moves
horizontally across a timeline indicating the current position in the song. The
current position is indicated by the time counter at the top of the Home screen.
All projects start at 00:00:00.0.
Function Control Action
Record
The LED ring illuminates red while recording is underway.
Push up (REC) to manually start recording from the current
position on the timeline. You can manually start recording
during playback or when stopped. Only armed channels are
recorded.
Stop
Press in to stop recording or playback at the current position.
Pressing Stop when already stopped returns the playback
cursor to the start of the song.
Play
Push down to start playback from the current position. Press
down again during playback to pause at the current position.
If at the end of the song, pressing play does nothing.
Rewind / Jump
to previous
cue mark
Push left to jump to previous cue mark. See Locating to
Q-Points.
While in playback, push and hold left to rewind.
When the MixPre is playing back or paused, moving the
joystick to the left (<<) rewinds at 2x speed, then after
holding for 5 seconds, it increases to 16x speed.
Fast forward /
Jump to next
cue mark
Push right to jump to next cue mark. See Locating to
Q-Points.
While in playback, push and hold right to fast forward.
When the MixPre is playing back or paused, moving the
joystick to the right (>>) fast-forwards at 2x speed, then
after holding for 5 seconds, it increases to 16x speed.