User Manual
35
PROJECTS
3. Rotate the HP encoder to highlight the chosen project; push in encoder to
open the project.
Once selected, the project is opened and the Home screen is displayed. You
are ready to start recording.
Copying Projects
You can manually copy any existing project or automatically copy the active
project to a USB Thumbdrive. This is ideal for backing up or sharing your
projects.
To auto-copy the active project:
1. Insert a USB thumbdrive into the USB-A port.
2. If the USB thumbdrive has not been previously formatted in the MixPre-
10M, format it rst. See Formatting SD Cards & USB Thumbdrives for more
information.
⚠ The formatting process erases all data.
3. No need to do anything else. The MixPre-10M will automatically replicate
the active project from SD card to USB thumbdrive. See Copying to a USB
Drive for more information.
To manually copy a project to a USB thumbdrive:
1. Insert a USB thumbdrive into the USB-A port.
2. If the USB thumbdrive has not been previously formatted in the MixPre-
10M, format it rst. See Formatting SD Cards & USB Thumbdrives for more
information.
⚠ The formatting process erases all data.
3. Tap .
4. Tap Project > Copy. (Copy is disabled when no thumbdrive is present.)
5. Use the encoder to select a project.
6. Tap OK to conrm copy.
⚠ Do not remove the USB thumbdrive from the recorder when copying is in
progress.
Trashing Projects
Since SD cards are capable of holding many gigabytes of data, the list of
projects can become quite long. You can trash any project apart from the one
that is currently active.